Euphoria Posted December 8, 2020 Share Posted December 8, 2020 My h115i platinum AIO has an issue with lighting on startup of my computer. iCue is enabled as a startup program and when the computer starts the RGB on the radiator fans and the pump are rotating through spiral rainbow super fast whilst the other pieces in my computer are defaulted to the medium speed and work as intended. I have to quit iCue and reopen it for this to correct itself. Any help in correcting this would be appreciated. Link to comment Share on other sites More sharing options...
c-attack Posted December 8, 2020 Share Posted December 8, 2020 It takes a good 20 seconds plus for CUE to load into software mode after you reach the OS desktop. Are you talking about the boot period? Or after CUE is running? You can set individual hardware lighting for most devices. Spiral Rainbow not only has three speeds, but how fast it appears to the eye will depend on the number of LEDs is the zone. The speeds are fixed, but the device LEDs are not. That makes 4 LED/sec look moderately paced on ML fans, but rather slow on a 34 LED QL or a keyboard. Check the HW lighting preset for the Platinum. Try it at the slowest pace. (if this is a hardware mode issue). Link to comment Share on other sites More sharing options...
Euphoria Posted December 8, 2020 Author Share Posted December 8, 2020 It takes a good 20 seconds plus for CUE to load into software mode after you reach the OS desktop. Are you talking about the boot period? Or after CUE is running? You can set individual hardware lighting for most devices. Spiral Rainbow not only has three speeds, but how fast it appears to the eye will depend on the number of LEDs is the zone. The speeds are fixed, but the device LEDs are not. That makes 4 LED/sec look moderately paced on ML fans, but rather slow on a 34 LED QL or a keyboard. Check the HW lighting preset for the Platinum. Try it at the slowest pace. (if this is a hardware mode issue). It stays this way until i close it regardless of time after startup, and when i drag the slider to change the pace of the rotation nothing changes its still blinking at what i assume is the fastest possible rate to where it doesnt look like rainbow spiral but a rave. Link to comment Share on other sites More sharing options...
Recommended Posts