Jump to content
Corsair Community

Need help figuring out why one of the RGB is not working. Corsair Q120 RGB.


fadedintensity
 Share

Recommended Posts

All fans were working fine yesterday (total 6) then I booted today and it was running only 2 fans of Q120 and 0 fans for M120. I changed the RGB hubs using 1 for Q120 fans and 1 for M120 so it fixed the M120 issue but Q120 still has 1 fan not working. I have it set up as 1-2-3 and did set up as QL with 3 fans, I am not sure if i turned off RGB somewhere (?). I am using Commander pro. Please someone can guide/help me i would greatly appreciate it, thank you

 

https://gyazo.com/558d5a86cff218f5968abc1c85d89df0

127276771_1081505908966357_5206086306565672946_n.thumb.jpg.65e3fc2c20f93fd352f65649182b03ff.jpg

128363182_1686314268212521_1596975309550278710_n.thumb.jpg.6c5833c46bc2f3994cac2e3b07eb21ae.jpg

Link to comment
Share on other sites

The lighting works in series, so if there is a problem on one LED on one fan or in the hub, it will stop the lighting. Try plugging each of the three QL into port 1 on the Core/RGB hub one at time. See if any of the fans don't light up (bad fan). If they all check out, put them back into 1-2-3. If #3 is still out, swap 2-3. If #3 remains out, you likely have a bad hub. This only applies to the RGB cables. The separate fan PWM wires don't matter for this.
Link to comment
Share on other sites

 Share

×
×
  • Create New...