Jump to content
Corsair Community

H150i Pro Fan Issues


KSH
 Share

Recommended Posts

So I´ve recently built myself a new rig. Everything is working fine except for the fact that one of the fans on the cooler is stuck on a high rpm.

 

This has made the rig quite loud, and I'm worried it will shorten the life span of the fan.

 

I have tried updating the iCue software, and making a custom fan curve. But none of these things worked. I can adjust fan 1 and 3 just fine. Number 2, just ignores all orders from iCue. I have double-checked that all the cables are plugged into the right places and everything.

 

Unsure what to do now. Any ideas?

 

1565457540_H150iFanCurve.thumb.jpeg.66c40ffec3a28625b6861311914e65dd.jpeg

Link to comment
Share on other sites

Pop #2 off the splitter and then re-connect it. Sometimes you don’t get good contact on all of the pins. If that does not change things, swap fan 2 with either #1 or #3 on the cable. You are looking to see if the problem follows the fan to the new connector (problem with the fan) or now applies to the “new” #2 (problem with splitter or controller).

 

This is a H150i XT, correct?

Link to comment
Share on other sites

 Share

×
×
  • Create New...