Jump to content
Corsair Community

corsair h150i rgb pro xt


adithya46
 Share

Recommended Posts

I by-mistakely did a force firmware update of my liquid cooler corsair h150i rgb pro xt? will that cause a issue ? cause temps increased a bit . before the idle was 27c fans running at 450 rpm and now the idle is 31 C fans at 830 rpm . how to restore the setting factory setting where it use to be 27C at idle and only one pipe or pump is having vibration other one is very silent . please help Edited by adithya46
Link to comment
Share on other sites

Your fans are running faster because the coolant is 4C warmer. That is a fairly typical fluctuation during the course of normal events. The curves have not changed, but you always can make your own curve to have it do what you want. Performance Tab +. Use the shape tools in the upper right hand corner to get yourself started. Then adjust the dots to where you want them to be for your normal range of coolant temperatures.
Link to comment
Share on other sites

 Share

×
×
  • Create New...