Jump to content
Corsair Community

A7N8X +Athlon XP2400+ Twinx 512Mb 3200C2 best settings


kirikiri

Recommended Posts

Dear Forum

 

I have bought a TwinX 512 Mb 3200C2 DDR set and I want to know what will be the more stable settings for my system:

 

I have a A7N8X motherboard v 1.04 with a Athlon XP 2400+ cpu

the FSB jumper is set as 266/333.

 

What will be the best BIOS settings in conjunction with this memory?

 

Actually when I use such a program as Nerovision Express to make a DVD, my computer freezes near the end of the process...I never had that with my old DDR266 Kingston memories, so there's probably settings problems I don't see.

 

Thanks in advance

 

Daniel

Link to comment
Share on other sites

  • Corsair Employee

Please install the modules in slots 1-3 or 2-3 and set these settings after you load setup defaults.

CPU Freq: 133 MHz

System Performance: User Define

Memory Frequency: 125%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 6T

The test your system with http://www.memtest.org to make sure its stable.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...