Jump to content
Corsair Community

Corsair Capellix 360


DilukshanN7
 Share

Recommended Posts

Hey there,

 

It should be using a default curve in response to the coolant temps.

 

Does this also work for a H115i Pro? Does it also apply custom curves that depend on the coolant temp?

If yes does this also work for a commander pro to make the connected fan curve bound to the h115i pros coolant temp?

 

 

Thanks

Link to comment
Share on other sites

All of the "i" coolers have programmable fan curves. You don't have to use the three presets and they may not be appropriate for all room temperatures, but you should use coolant temperature for your curve regardless of where you place the points.

 

The Commander Pro can use coolant temperature (H115i Pro Temp) as a sensor choice for any fan curve. However, it will not be able to access that data when the software is not running. If you spend a lot of time in that state, you will want to use the temperature probes from the Commander to measure the exhaust air temp from the radiator. That will effectively mirror coolant temperature and is the native sensor for the Commander.

Link to comment
Share on other sites

 Share

×
×
  • Create New...