Jump to content
Corsair Community


Recommended Posts

Hi everyone.


Just wanted to get some recommendations on cases that can fit the h150i PRO XT (360mm AIO) as a front intake and with tubes down?


Tubes down is a must as recently a lot of info going around about incorrectly front mounting AIO with the tubes up.


I'm also using a 2080ti (305mm length) which the tubes will need to navigate around.


I was looking at Phanteks P500A and Cooler Master H500 but hard to tell if there's enough space and tube length for the H150 to reach the bottom. Suggestions would be much appreciated!


I know there is also the option for top exhaust which solves the tubes problem, but worried this will make my CPU too hot especially as I'm using the very hot i9900k and 2080ti GPU.



My Specs


CPU Intel i9 9900k

GPU ASUS GeForce RTX 2080 Ti 11 GB ROG Strix OC Edition

Memory Corsair Vengeance LPX 64 GB (4x16GB) DDR4 3000 MHz C15

Storage Samsung 970 EVO Plus 1 TB

Motherboard ASUS ROG Maximus XI Hero (Wi-Fi) Z390

Cooler AIO Corsair H150i Pro XT

PSU 750W Corsair HX Series HX750


Many thanks in advance for any help!



Link to comment
Share on other sites

  • Create New...