Jump to content
Corsair Community

Possible to set 0% fan curve on AX860i?


SPL Tech
 Share

Recommended Posts

I have an AX860 and I was thinking of getting the I version, but I noticed the I version does not have a hybrid switch on the back like the AX860 does. I set Icue to allow demo PSUs to see what I could control and it looks like the lowest I can set the fan curve to is 40%. I want the fan to be completely off when the PSU is at idle. Is this possible with the 860i?
Link to comment
Share on other sites

Hi buddy...

 

When in its default mode. it would be zero RPM until the load is high enough to need the fan. this is its 'Silent Operation' Mode

 

as for custom fan curves,, unfortunately no you cant set it any lower than 40%

Link to comment
Share on other sites

Hi buddy...

 

When in its default mode. it would be zero RPM until the load is high enough to need the fan. this is its 'Silent Operation' Mode

 

as for custom fan curves,, unfortunately no you cant set it any lower than 40%

 

Something that I mentioned oh a long time ago that Corsair should rectify. What it needs is just to allow it to be off below a certain temperature then force it to be at least 40% above that temperatures.

Link to comment
Share on other sites

 Share

×
×
  • Create New...