Jump to content
Corsair Community

Vengeance RGB Pro RGB acting up


epjkb
 Share

Recommended Posts

So for the past 2 months, one of my two Vengeance RGB Pro DDR4 Ram sticks has been having an issue with the RGB lighting where it won't start until after I load up iCue.

Normally when you start your computer all your rgb equipment will light up and then go to whatever settings you have in icue, but mine just wont start until iCue is running. What is wrong with it?

Here is my system specs if it matters: https://pcpartpicker.com/user/epjkb_games/saved/fcfz7P

IMG_0053.thumb.JPG.7ef3f14a65d96afc501cbcc1f2ebf510.JPG

Link to comment
Share on other sites

  • Corsair Employees

You need to go into the Settings menu in iCUE, select the memory, turn off "Enable full software control," go back to the main menu in iCUE, select your memory, go to Lighting Effects, and set an effect.

 

Do note however if you do not wish to have the RGB memory LEDs on when you put your system to sleep, or your computer provides power do the DRAM when the computer is off, your modules will be lit if you do the above steps.

Link to comment
Share on other sites

 Share

×
×
  • Create New...