Jump to content
Corsair Community

iCUE ELITE CAPELLIX Faq and Setup Info


Zotty
 Share

Recommended Posts

10 hours ago, LeDoyen said:

Apparently it's finally coming this month

We shall see.

They already have that functionality in the Commander Core XT though. So one can be hopeful that it's a simple port.

image.thumb.png.ddadcfb064149ecf12859fdc02e378f3.png

Link to comment
Share on other sites

  • 2 weeks later...

image links fixed and edits made. more to follow 🙂

Link to comment
Share on other sites

On 9/13/2021 at 9:52 PM, Zotty said:

image links fixed and edits made. more to follow 🙂

Hi Zotty,

I want to replace my H115i RGB Platinum with the new Capelix (like the pump design).

I currently have a CoPro with 6 LL fans (including the AIO - I've replaced the ML), many LED strips, etc..

What would be the best way to connect the new AIO with the CoCo? I don't want to replace the CoPro.

And I would like everything to be the same as now, all colors are synced perfectly and can control speed, etc..

Link to comment
Share on other sites

On 10/28/2020 at 3:14 AM, c-attack said:

You can run it through the Commander Pro's pass through ports or directly to the MB. Normally, it doesn't matter but some AMD boards are picky.

However, no matter what the Commander Pro and Commander Core will still be separate devices. There is no way to link or merge the fans lighting patterns together into one group, aside from the Lighting Link functionality.

This is terrible. So I guess Corsair just lost a client, since I won't be buying the new AIO if it won't sync with my CoPro as it used to do with the H115i RGB Platinum.

This will probably ruin all my lighting profiles as well.

Link to comment
Share on other sites

1 hour ago, Titan777 said:

I won't be buying the new AIO if it won't sync with my CoPro as it used to do with the H115i RGB Platinum.

The quote you’re referencing is about running sequential and continuous lighting patterns through multiple devices. That is not the same as synchronization where each device exhibits the same lighting pattern at the same time. Synchronization can be done on most devices by copying the lighting effect to the other device via the Lighting Library, although LED count and geometry still matter. 

Link to comment
Share on other sites

On 9/20/2021 at 8:44 PM, c-attack said:

The quote you’re referencing is about running sequential and continuous lighting patterns through multiple devices. That is not the same as synchronization where each device exhibits the same lighting pattern at the same time. Synchronization can be done on most devices by copying the lighting effect to the other device via the Lighting Library, although LED count and geometry still matter. 

Thanks for clearing this out.

Can you help with my other question above? Thanks.

Link to comment
Share on other sites

On 9/22/2021 at 10:21 PM, Titan777 said:

Can you help with my other question above? Thanks.

The Elite series requires the Commander Core to work. The pump gets its power and directions through that device, so it must be there. However, if you are looking to have the least amount of programming changes possible, you would leave the Commander Pro as is and then add the Com Core with no fans on the RGB side. I would keep the PWM connectors for the radiator fans on the Com Core so they can use the native coolant temp sensor in the pump. Otherwise it requires active software to fetch the data from pump to Com Core to C-Pro. The Com Core will show up in CUE with the OLED face making it just like your current set up. Pump speed and pump RGB adjusted there along with two radiator fan speeds.  Case fans and all fan RGB on the C-Pro. 
 

I am assuming you will not use the new ML-Elite fans and keep your LL. That is fine and the reason for leaving the C-Pro installed as the RGB controller. If you move the RGB to the Com Core, you will need to re-program or copy the lighting effect from C-Pro to Com Core for each profile. It does not inherit previously created lighting effects from other controllers. To do this you leave both controllers connected and move the fans over to the Com Core so you can see the result. As long as the C-Pro has LLx6 in the lighting setup the saved lighting effects will be in the effects list and can be transferred via the library. Once that is done, the Commander Pro could be removed. 

Edited by c-attack
  • Thanks 1
Link to comment
Share on other sites

  • 2 weeks later...
On 9/23/2021 at 1:17 PM, c-attack said:

The Elite series requires the Commander Core to work. The pump gets its power and directions through that device, so it must be there. However, if you are looking to have the least amount of programming changes possible, you would leave the Commander Pro as is and then add the Com Core with no fans on the RGB side. I would keep the PWM connectors for the radiator fans on the Com Core so they can use the native coolant temp sensor in the pump. Otherwise it requires active software to fetch the data from pump to Com Core to C-Pro. The Com Core will show up in CUE with the OLED face making it just like your current set up. Pump speed and pump RGB adjusted there along with two radiator fan speeds.  Case fans and all fan RGB on the C-Pro. 
 

I am assuming you will not use the new ML-Elite fans and keep your LL. That is fine and the reason for leaving the C-Pro installed as the RGB controller. If you move the RGB to the Com Core, you will need to re-program or copy the lighting effect from C-Pro to Com Core for each profile. It does not inherit previously created lighting effects from other controllers. To do this you leave both controllers connected and move the fans over to the Com Core so you can see the result. As long as the C-Pro has LLx6 in the lighting setup the saved lighting effects will be in the effects list and can be transferred via the library. Once that is done, the Commander Pro could be removed. 

Awesome! Thanks for the detailed reply.

So basically I just need to keep the CoCore + CoPro and connect all RGB's to the CoPro.

The only thing to connect to the CoCore is the Elite Capelix PWM fans. (doesn't require a fan hub?).

And everything should work and look the same as now with the H115i Platinum. Correct?

Edited by Titan777
Link to comment
Share on other sites

Yes, leave the RGB connector on the LL fans on the Commander Pro.  That is essential to avoiding a redo on all lighting profiles.  The PWM side is completely separate.  You definitely want the 2 radiator fans on the Commander Core for coolant temp based control.  The other case fans can be moved (PWM wire only) to the Com Core if you want the other case fans to run from coolant temp too or they can stay where they are on the Commander Pro using whatever method you currently employ.  

 

The Commander Core is a RGB Lighting Hub inside of a 6 fan PWM controller, along with the special pump connector on the end.  All of the "Core" products have that RGB Lighting Hub built in, but at a cost of 6 fans per device as opposed to the 2x6 you can do on a Commander or Lighting Node Pro.  

 

The essential functionality of the Com Core is the same and the Elite works the same way as a Platinum, but the interface might feel a bit different at first.  Basically they have taken the internal fan and RGB controller from the Platinum and made it external, while also expanding it out from 2 to 6 fans.  That is a win for most everyone.  

  • Thanks 1
Link to comment
Share on other sites

Recent diagram i did for a User with a 1000D  22 RGB fans.H150i elite in Push/pull config.  1 Commander Pro and 3 RGB Fan LED hubs (2 cloned hubs and 2 cloned fans on the none cloned hub)

 

Cloned means using splitters cables either on the hubs or on the fans

 

1247947101_ottoflowerdiagram.thumb.png.86d1d253349ba9cdf0bc9f97919aeaae.png

Link to comment
Share on other sites

I bought the H150i ELITE and I'm currently very disappointed. It makes a high pitch noise under load that is annoying. Making noise is ok when you put your ear next to the case. In normal occasion when you go just a little far you don't hear the noises anymore, but this noise because is high pitch it goes far and very annoying. I'm going to try 2 more ways to mount it in the case (5000X) to see if it's vibration with the case. If it continues, I will go with another brand AIO and I have to say that you should avoid this line.

Edited by Zodler
  • Like 1
Link to comment
Share on other sites

Does anyone know if the hoses on the 170 AIO cooler will reach the CPU socket in 1000D case?

I bought the case when it first came out hoping to use the 360mm adapter bracket for the top of the case but it was never available. Now i see they are making a 420mm AIO and im curious if they made it to work as a top mounted cooler in the 1000D.

thanks in advance! 

Link to comment
Share on other sites

OK Zotty, C-Attack and Dev-Biker, resident Corsair Experts!!

 

I assume you've seen the launch of the ELITE LCD Cappellix upgrade Kit. I've already Clicked the "Notify me when available' link on the website for my Elite Cappellix H150i. 

One simply removes the current LED module on top of the pump unit and replaces it with the magnetically attached LCD Screen Module.

 

What are the chances that those of us who go this upgrade path and then have a spare LED Module for our Cappellix....could turn said spare Cappellix LED Module into a Cool RGB Corsair Logo affixed on the inside or outside of our cases via a custom cable connected to an appropriate RGB port on our CoCo,s or CoPro;s or LNC etc and set up as an LL120 fan or whatever?

Link to comment
Share on other sites

I like the sound of of using the old LED module as an RGB logo it would look cool somewhere on my desk!

Lets hope it will be easy to do.

Link to comment
Share on other sites

edits made and info added to include Corsair Elite LCD Upgrade Kit

 

Store link

UK
https://www.corsair.com/uk/en/Categories/Products/Liquid-Cooling/iCUE-ELITE-CPU-Cooler-LCD-Display-Upgrade-Kit/p/CW-9060056-WW

 

Edited by Zotty
Link to comment
Share on other sites

Hi all. I've just installed the H115i Elite Capellix this weekend on my new i7 11700k, but I'm a bit concerned with the pump speeds that I'm getting.

On iCUE 4, my pump shows the following speeds:

  • Quiet Preset: 2985 - 3000 RPM
  • Balanced Preset: 3140-3165 RPM
  • Extreme Preset: 3370RPM

Pictures below.

unknown.png

unknown.png

unknown.png

Whilst I'm very happy with the temps I'm getting (~35C - 45C on idle), I'm a little concerned by how high these pump speeds are.

I've asked in the corsair Discord and some other community members have told me that everything's okay, but I just can't understand why my pump is running so much faster than what I'm seeing described elsewhere.

Could anybody shed some light on what might be happening to me here?

Link to comment
Share on other sites

HI,

So I have one of these and made my purchase of the 12900k which is due to arrive next week and yet I still cannot order the standoffs for the LGA 1700 Kit not even a notify button, Corsair can you enlighten users on how we are supposed to mount our AIO's when I can't your LGA 1700 from literally anywhere in the UK or Europe??

Link to comment
Share on other sites

  • 2 weeks later...

Hi there,

I bought a H100i Elite Capellix, and I use it with 6 LL Fans connected to the Commander Core (CoCo).

The rear fan exhaust is connected to the port 1, the two top fans to ports 2 and 3, and the 3 front fans are connected to the ports 4, 5 and 6 of the CoCo.

If I select the pong effect for all the 6 fans the light of the rear fan exhaust (connected to port 1) is not following the pong effect correctly, it ups when all other fans downs.

I have an Asus ROG Strix B-550f Gaming (wifi) motherboard.

Config installed.

https://www.corsair.com/us/en/Categories/Products/Cases/Mid-Tower-ATX-Cases/iCUE-4000X-RGB-Tempered-Glass-Mid-Tower-ATX-Case/p/CC-9011204-WW

https://www.amazon.ca/gp/product/B08G1NSG7F/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Rear fan below plugged into the CoCo.

https://www.amazon.ca/gp/product/B07VGJMQLB/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

image.thumb.png.20dfbff9f1c24f8cef6bdf592b48e4f7.png

Thanks for your help.

Link to comment
Share on other sites

On 11/6/2021 at 8:24 PM, bsmaff said:

Quick question is the H170i Elite Cappelix the same as the upcoming H170i Elite LCD?

Are these the same coolers but one has the LCD add-on?

Fans will be slightly different iirc...

Link to comment
Share on other sites

16 hours ago, awaywego said:

Hi there,

I bought a H100i Elite Capellix, and I use it with 6 LL Fans connected to the Commander Core (CoCo).

The rear fan exhaust is connected to the port 1, the two top fans to ports 2 and 3, and the 3 front fans are connected to the ports 4, 5 and 6 of the CoCo.

If I select the pong effect for all the 6 fans the light of the rear fan exhaust (connected to port 1) is not following the pong effect correctly, it ups when all other fans downs.

 

have you set the bellow settings up dude?

 

and imho...  bottom front fan should be number 1.. fan above it as number 2.. 3 above that...  4 top front... then 5.. then number 6 in rear.. this allows effects to play up and over the case.. as designed to do 🙂 .

 

image.thumb.png.700544554e2e75c2e089fb54bbca4432.png

Link to comment
Share on other sites

Thanks @Zotty, works indeed.

Now still the same topic, any idea why i'm not able to control the speed of the rear fan? It turns constantly at ~1500rpm whatever the profile I use. It is plugged into the CoCo as the others.

I dont have any issues with the other fans .

Thank you

https://content.invisioncic.com/p313717/monthly_2021_11/image.png.d800e437c2ba0176f818ae4326d66a22.png

Link to comment
Share on other sites

9 hours ago, awaywego said:

Thanks @Zotty, works indeed.

Now still the same topic, any idea why i'm not able to control the speed of the rear fan? It turns constantly at ~1500rpm whatever the profile I use. It is plugged into the CoCo as the others.

I dont have any issues with the other fans .

Thank you

https://content.invisioncic.com/p313717/monthly_2021_11/image.png.d800e437c2ba0176f818ae4326d66a22.png

Whats happens if you attach a different fan? say.. swap it with number 5?.. its either a faulty fan or a faulty header imho... (note.. power down the machine to swap PWM headers on the CoCo,, Hot Swapping is not recommended)

Link to comment
Share on other sites

Hello fellow enthusiasts!

I'm currently planning an overhaul on my PC and will be getting a h150i elite lcd cooler and a 5000x case.

In total the new case will have 10 fans, 3 ML120 elite in the front, 3 SP120 elite in the side panel, 3 ML120 elite in the radiator mounted at the top and 1 SP120 elite in the rear.

The case itself comes with a rgb controller and a rpm controller aswell for up to 6 fans, and the cooler comes with the commander core, wich does the same (rgb and rpm control) for another 6 fans.

My question is, do I need something else to have all fans sync up perfeclty on iCUE? Not just talking about effects but patterns as well. For example the pong effect, will it work properly? Or do I need something like the lightning node or the commander pro?

Thanks in advance.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...