Jump to content
Corsair Community

Temp sensor issue


capricorn123290
 Share

Recommended Posts

the temperature sensor is plugged into port 1 on the commander pro and it is the only sensor plugged in. I am unable to set custom fan curves for the pump as it says that I need to plug the sensor into port one (it is). the commander pro is showing a temperature on the commander pro status screen along with the three voltages 3.3,5 and 12v. I take this to mean that it is indeed reading the sensor.

 

Is there something I'm missing to get it to recognize the temp probe?

Link to comment
Share on other sites

It seems like you are stuck in the Hydro X “tuning”. The custom curves don’t care what you pick for the sensor and it doesn’t have to be in slot 1.

 

Performance tab, click + to create a new curve. A graph will appear below. In the Sensor drop menu, scroll until you find Commander Pro Temp #1. Now set the temp/speed points. Don’t forget to apply the curve to the pump. Both will be yellow when active.

Link to comment
Share on other sites

 Share

×
×
  • Create New...