Jump to content
Corsair Community

I need help


Evilzade
 Share

Recommended Posts

I have Corsair iCUE 220t RGB Airflow CC-9011173-WW

 

I'am install the iCUE software.

 

I choose RGB Effect (Rainbow Wave ) from Lighting Channel.

 

when the closing iCUE software, always changed effect.

 

I need default effect without icue software.

 

How can i pass this problem ?

Link to comment
Share on other sites

The 220T should have a Lighting Node Core as the controller. In CUE, select the Core tab from the top. On the left side will be the Lighting Set-up, Lighting Channel (for software lighting) and Hardware Lighting. Hardware Lighting is what's in use any time the software is not running. Because it must from the controller directly, there are a more limited set of effects to choose from.
Link to comment
Share on other sites

Do you have 6 QL fans? You mentioned a 220T case that comes with 3 SP-Pro fans. Currently, your lighting set-up is configured for fan type QL x 6. I am not entirely sure how 3 SP-Pro would behave without the software if set incorrectly. The hardware effects are somewhat different from the software mode preview in actual appearance based on your fan type and number of LEDs. So if you are running 6 QL and select "rainbow wave" for your hardware lighting, what you get on the other end will be more like rainbow channel. Rainbow Wave and Spiral Rainbow do not exist in the hardware mode, despite the misleading previews.

 

Aside from that, I can't think why they would work in software mode, but turn off with in hardware mode.

Edited by c-attack
Link to comment
Share on other sites

  • 3 weeks later...
 Share

×
×
  • Create New...