TheMoneySpent Posted September 8, 2020 Share Posted September 8, 2020 Hey guys! So I recently bought the Commander Pro and 6x QL series fans and it came with the Lighting Node Core and whenever I plug my Node Core into my ComPro it won't detect through iCue. Unless I plug both into my motherboards USB ports directly then both would be detected but that would make my ComPro an expensive fan hub. I want to use the features that it came with :(: My specs are Asus x570 Prime-P 3700x 2080 Super (No RGB on this one) CMW16GX4M2C3200C16W (Corsair Vengence PRO 2x8) Coolermaster 750w GOLD Lian Li O11 Link to comment Share on other sites More sharing options...
FightingEntropy Posted September 17, 2020 Share Posted September 17, 2020 I'm having the same problem. I've tried most everything I can think of to fix it. Please let me know if you figure something else out. Link to comment Share on other sites More sharing options...
Tgrubbs Posted September 25, 2020 Share Posted September 25, 2020 I also have the exact same problem. I’m about to see if there is something like a PCI card with more USB headers on it so I can just bypass the commander core pros USB ports. Link to comment Share on other sites More sharing options...
Tgrubbs Posted September 30, 2020 Share Posted September 30, 2020 I also have the exact same problem. I’m about to see if there is something like a PCI card with more USB headers on it so I can just bypass the commander core pros USB ports. Update Here, I purchased a $10 USB Header Splitter from Amazon and plugged that into the MOBO. I then plugged both the commander core as well as my corsair AIO into the splitter. The result is everything works exactly as I wanted. No USB disconnects every few minutes, and the iCue software now recognizes all my USB controllers for the lights/fans. It don't understand why this resolves the problem, but it's working perfectly now. Link to comment Share on other sites More sharing options...
ecetim Posted October 1, 2020 Share Posted October 1, 2020 I have this same issue. Lighting Node Core that came with QL120's is not recognized when plugged into Commander Pro. Is recognized when plugged direct into mobo (Asus Crosshair VIII X570). I have the spare USB port on the mobo to use, but it bugs me that the onboard ports of the $75 controller don't work as they should. Paging Corsair support folks... Link to comment Share on other sites More sharing options...
Recommended Posts