Jump to content
Corsair Community

I think I have a bad module


Recommended Posts

I have a pair of Twinx CMX256A-3200C2 (xms3202v6.1), and i believe that one of the two sticks is bad. When I have the bad one installed, my motherboard sometimes reports a memory error, or it will get as far as windows boot and crash with both sticks. When I have the other stick installed, I have no problems what so ever. I have verified my bios settings, cleared bios, switched dimm slots, but no success. So I think I need an RMA for a new pair :[pouts:
Link to comment
Share on other sites

Except I tested each stick of memory individually with memtestin my girlfriends machine and one came up with 40 errors after one pass, and at 72% done the other has 4626 errors. :(

 

And that is just HER memory.( CM64SD256-2700CX2H )

 

My memory( TWINX1024-3200C2, ) while they both pass memtest when both inserted( Have yet to test individually ) I have been getting this error lately, only when closing Internet Explorer windows, and I have reformatted my PC and still get it. So unsure if it is memory related or possibly mobo( A7N8X-Deluxe )

 

Do either of us really have to get a support ticket?

 

Inac

memerror.thumb.JPG.709b1b79f099079df74925cb745016e3.JPG

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...