charbel1011 Posted August 10, 2020 Share Posted August 10, 2020 (edited) So i have 6 fans in commander pro all of them follow my custom curve but fan 1 that stubborn fan. i have to restart my pc sometimes to make it follow my curve. i read couple of threads about the same issue. and it's not a hardware issue, as people as they stated they rmad the commander pro and it's same issue. any fix? my icue logs https://1drv.ms/u/s!Ar1B_9k62Xl1mDI2rYgehd1aKaLO?e=40wfGm Edited August 10, 2020 by charbel1011 Link to comment Share on other sites More sharing options...
c-attack Posted August 11, 2020 Share Posted August 11, 2020 Your best shot at this is going to be a firmware flash through CUE settings "force update" method. It always seems to be Fan #1 and when it's not, then the problem is usually something else. You can also try toggling he Fan 1 setting in iCUE from "auto" to 4 pin or if you are already on 4 pin, deliberately switch it to 3 pin and then back to 4. This is not usually successful, but it is less risky than flashing the firmware repeatedly. Link to comment Share on other sites More sharing options...
Recommended Posts