Jump to content
Corsair Community

New 570X build questions


Wellsy
 Share

Recommended Posts

So I've bought a 570x, with H100i RGB Platinum, and 32GB 3200 RGB Pro RAM.

 

Now the motherboard is a ASUS TUF Gaming B550 Plus, my question and i know its been asked before on here but every one iv read so far doesn't include the MB and mainly covers fitting alongside the Corsair RGB RAM (which I'm now fairly confident it will, correct me if I'm wrong there), but will the H100i fit, top mounted, and fit over the VRM heatsink on the MB?

Link to comment
Share on other sites

Hi Wellsy,

 

I have the 570X Crystal and a rad and fans up top (30mm and 25mm respectively). I also have the Vengeance Pro RGB ram (2x8GB) although my motherboard is the MSI B450 Tomahawk Max.

 

The rad bumps the top of the ram sticks although it is just about resting with minimal pressure. I had a 28mm rad up top earlier and there was a small but discernible gap. Your rad is I think 27mm, and your fans are definitely 25mm. so you've got +1mm on my original set up where there was still a small gap.

 

If no one else has your particular set up you could mock-up a cuboid and try to slot it up underneath the chassis ceiling and above the RAM sticks...

Link to comment
Share on other sites

 Share

×
×
  • Create New...