Jump to content
Corsair Community

H100i CPU Cooler RGB Problem


Kvnz
 Share

Recommended Posts

Hi there,

 

Just finished installing the H100i RGB Platinum and everything seems to be working fine except for the RGB on the CPU cooler itself. I plugged in mini-usb cable to the CPU cooler and the other end into JUSB1, and connected the SATA power directly to 550w PSU. Additionally, the connected fans on the radiator are spinning fine along with the RGB for them working as well. Despite this, the RGB for CPU cooler itself is not turning on. Mind you, I have yet to even install windows on the PC so I have not tried to set it up with iCUE. Can anyone help?

 

Thanks.

Edited by Kvnz
Link to comment
Share on other sites

So the pump is installed to the CPU_FAN/PUMP_HDR on the motherboard? I just didn't see this mentioned so don't think I am attacking your intelligence. ;) You only mentioned the SATA/USB, but not the 3-pin fan/pump connector.

 

I actually hate the amount of cords coming off this pump there is way too many cords to it, but I kind of got stuck with it since everything was sold out.

Link to comment
Share on other sites

 Share

×
×
  • Create New...