Jump to content
Corsair Community

K70 RGB Firmware Upgrade


Valdiralita
 Share

Recommended Posts

When I update the Firmware of my keyboard from 2.05 to 3.08 i get the following errors:

 

2020-07-29T18:32:47 I cue.firmware.update.controller: "K70 RGB" FW update has been started. From "Primary FW: 2.05; Secondary FW: 2.05; Bootloader FW: 0.11" to "Secondary: Application: 3.8"

2020-07-29T18:32:47 I cue.hid_report_worker: Stopping report worker "\\\\?\\hid#vid_1b1c&pid_1b13&mi_01&col03#8&fcbe735&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"

2020-07-29T18:32:47 I cue.hid_report_worker: Waiting for report worker stop "\\\\?\\hid#vid_1b1c&pid_1b13&mi_01&col03#8&fcbe735&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"

2020-07-29T18:32:48 W cue.firmware.update.process.proto_n: "0" stderr: DD: tryOpen: Failed to open \\?\hid#vid_1b1c&pid_1b13&mi_01&col02#8&fcbe735&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}: 32

2020-07-29T18:32:48 W cue.firmware.update.process.proto_n: "0" stderr: DD: tryOpen: Failed to open \\?\hid#vid_1b1c&pid_1b13&mi_01&col03#8&fcbe735&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}: 32

2020-07-29T18:32:48 W cue.firmware.update.process.proto_n: "0" stderr: DD: tryOpen: Failed to open \\?\hid#vid_1b1c&pid_1b13&mi_00#8&140b568d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}\kbd: 5

2020-07-29T18:32:48 W cue.firmware.update.process.proto_n: "0" stderr: DD: tryOpen: Failed to open \\?\hid#vid_1b1c&pid_1b13&mi_01&col01#8&fcbe735&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}\kbd: 5

2020-07-29T18:32:48 W cue.firmware.update.process.proto_n: "0" stderr: DD: tryOpen: Failed to open \\?\hid#vid_1b1c&pid_1b13&mi_01&col04#8&fcbe735&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}: 32

2020-07-29T18:32:48 W cue.firmware.update.process.proto_n: "0" stderr: DD: tryOpen: Failed to open \\?\hid#vid_1b1c&pid_1b13&mi_02#8&33a324f7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}: 32

2020-07-29T18:32:48 I cue.firmware.update.process.proto_n: "0" exit code: 4 exit status: 0 Reported: false false

2020-07-29T18:32:48 I cue.firmware.update.process.proto_n: All FW update tools finished: false

2020-07-29T18:32:48 I cue.firmware.update.controller: "K70 RGB" FW update has been failed. From "Primary FW: 2.05; Secondary FW: 2.05; Bootloader FW: 0.11" to "Secondary: Application: 3.8"

2020-07-29T18:32:48 W cue.firmware.update: Failure during abort.

Link to comment
Share on other sites

 Share

×
×
  • Create New...