Jump to content
Corsair Community

H100i Platinum RBG install question


MadDominant
 Share

Recommended Posts

Hey everyone,

 

I am currently running 3 LL120s as well as the 2 RGB fans that came with with the H100i platinum. I have them connected to the RGB hub and commander pro, all fans and RGB connect to commander pro / RGB hub EXCEPT the RGB coming from the CPU Cooler itself. It appears that I need a female to female converter RGB converter, if this is such a thing.

 

Has anyone ran into this issue?

Will the USB running from CPU cooler to MOBO take care of this issue?

 

MOBO - MSI MAG Z490 Tomahawk

CASE - Phanteks Eclipse P400A

 

*Edit - I understand I flubbed the title of post, apologies.

Edited by MadDominant
words
Link to comment
Share on other sites

Assuming this is the black "standard" H100i Platinum, it's two fans are high speed ML-RGB, so you won't want to mix them into the same controller as the 3 LL. It's possible to make it work, but there isn't a good reason to do so since there is another controller in the Platinum.

 

You will want the USB 2 connection from the Platinum to go back to the motherboard. That is your connection between software and device and the only way to control the lighting, fan speed, and pump speed. Both ML-RGB fans will appear under the H100i Plat. device and act as one group with the pump.

Edited by c-attack
Link to comment
Share on other sites

Just wanted to update that I got lost in the mess of SATA cables and didn't ever plug in the Commander Pro : /

 

I put LL120s in the front, mounted the AIO Radiator to those, put the AIO fans on the top for exhaust, all are RGB working and synced through the iCue.

Link to comment
Share on other sites

 Share

×
×
  • Create New...