connomar Posted July 23, 2020 Share Posted July 23, 2020 I've just purchased this unit, but the instructions say to mount to the rear panel. My case has a recessed fan only on the back, so the radiator won't go in. I've worked around it by mounting to the removable side panel, but I hate this option. The original H60 mounted the radiator the other way around, so the fan was in first which would work for my setup. Can this be done? Also, I'm surprised by the noise the pump makes. My monitoring software says the Fan/Pump is running at 4103 rpm plus or minus 40 revs. Is that fixed? Thanks Link to comment Share on other sites More sharing options...
connomar Posted July 25, 2020 Author Share Posted July 25, 2020 Well, nobody answered, so I took it apart again and reversed the fan and radiator with no problems. Then I took the rear fan that had been an intake fan and mounted to the top of the case as an exhaust fan. With the CPU at around 45C I was getting exhaust air out of the case at 37C after about 30 minutes of playing Train Sim World. Link to comment Share on other sites More sharing options...
Recommended Posts