Jump to content
Corsair Community

iCUE Config Review with Nine QL120 + H150i + HX1000i + CoPro + Two LiNoCor


jaynamics
 Share

Recommended Posts

I reviewed Zotty's excellent iCUE FAQ at https://forum.corsair.com/v3/showthread.php?t=173880 (thanks for that) before this post, so hopefully my proposed setup will work.

 

For the gurus out there, could I humbly ask if you could review my setup and recommend any corrections and improvements?

 

My MSI X570 MEG ACE motherboard only has two USB 2.0 internal headers, so I put the H150i on one and the rest on the other via a USB hub.

 

Thank you in advance.

Corsair_iCUE_System_Infrastructure_Design.thumb.jpg.2ab30f143d65374899a6b7bc6cf9c540.jpg

Link to comment
Share on other sites

I reviewed Zotty's excellent iCUE FAQ at https://forum.corsair.com/v3/showthread.php?t=173880 (thanks for that) before this post, so hopefully my proposed setup will work.

 

For the gurus out there, could I humbly ask if you could review my setup and recommend any corrections and improvements?

 

My MSI X570 MEG ACE motherboard only has two USB 2.0 internal headers, so I put the H150i on one and the rest on the other via a USB hub.

 

Thank you in advance.

 

Very similar to my configuration, connections are ok and you should have no problem at all.

My advice is to use also the 4 thermal sensors that come with the CoPro... put them in strategic points of your case, you won't regret the choice.

 

Baio

Link to comment
Share on other sites

 Share

×
×
  • Create New...