VanSevenSeat Posted July 19, 2020 Share Posted July 19, 2020 so i did cable management, unplug and plug some sata cable and suddendly the commander pro stop working, the device is not showing up in ICUE, fans are not running, i have hd120 and hd140 and only one led is lighting up, i try to push what ssem to be the reset button in the commander but nothing happen, so is there a way to reset the device ? Link to comment Share on other sites More sharing options...
VanSevenSeat Posted July 20, 2020 Author Share Posted July 20, 2020 so i have my commander pro connect to a sata splitter , one is for commando the other for a HDD, i read is not recommanded, can it be the cause of my dead commander ? because sometimes my hdd would not appear in my desktop i guess there wasnt enought juice ? Link to comment Share on other sites More sharing options...
BlaiseP Posted July 20, 2020 Share Posted July 20, 2020 A couple of more steps are required to reset a Commander Pro correctly: Ensure your PC running, unplug the SATA connection from the CoPro,On the front of the CoPro, there is a small hole. Using a straightened paperclip or similar, press the reset button found in the hole described and whilst continuing to hold the reset button down, reconnect the SATA cable (three hands would come in useful here).Release the reset button. Link to comment Share on other sites More sharing options...
Recommended Posts