Jump to content
Corsair Community

How to have 2 differend fans on 1 hub or how to sync 2 hubs


PRMees
 Share

Recommended Posts

Hi,

 

I got 3x Corsair LL120 rgb and 3x Corsair QL120 rgb

How can I use them all 6 on my single Lightning node core without problems

Or can I put 3 QL120 fans on 1 controller and 3 LL120 fans on my second controller I have connected already but yet not used!

Here is what I mean!

https://www.dropbox.com/s/x0yunw4v8bdskio/WhatsApp%20Video%202020-07-01%20at%2014.06.17.mp4?dl=0

Pong is working great on my 3 QL120 fans, but when it goes to the 3 LL120 fans at the top and back it acts weird

 

 

Thanks,

PRMees

Link to comment
Share on other sites

As I have read and also understood....different fans can not be on the same controller together. So your LL's would go on one and then the QL's on another.

 

There is a link at the top of the Forum in the stickies.....Zotty's. Check that out and I bet that will give you your information that you are asking about.

 

Hopes this helps....

  • Like 1
Link to comment
Share on other sites

for RGB effects to play correctly you would need them on separate Lighting Node Cores or RGB Fan LED Hubs. there is no way around that.. if you make your own profiles and affects to can get round it if mixing them. but as far as pre programmed effects. its all about LED count and where in the chain those LED's are. iCUE doesnt know the difference between an LL and a QL besides how many LED's each has.

 

 

https://forum.corsair.com/v3/showthread.php?t=173880

Link to comment
Share on other sites

 Share

×
×
  • Create New...