Endexcks Posted June 30, 2020 Share Posted June 30, 2020 hello there i read a lot looking around and didnt find anything helpful straight to it i have sp120 with the PC case x570; they speed and working find, but i want to control my sp120 thru commander pro but color is controllable on the case x570 has the button to change color but i want to control it on commnader pro i have set everything on the icue but seem nothing happening i have 5 sp120 connected to the rgb hub and #6 fan is a ML120 white which is at the rear of the case. what im missing any help i be thankful Link to comment Share on other sites More sharing options...
DevBiker Posted July 1, 2020 Share Posted July 1, 2020 First, you cannot put the ML-RGB fans on the same hub as the SP-RGB fans. Different protocol. Next, if the fans are still controlled by the case buttons then you still have it connected to the push-button controller. You need to disconnect the push-button controller and connect the fan hub to one of the Commander Pro's lighting channels and configure the channel for the 5 SP-RGB fans. Be sure to review the RGB FAQ in my sig. Link to comment Share on other sites More sharing options...
Recommended Posts