Jump to content
Corsair Community

A question about RBG and case fans


SeberDeper
 Share

Recommended Posts

Hello all.

 

Quick disclaimer - English isnt my native language so please bear with me :)

 

I have recently brought and installed 8 Corsair LL120mm and 5 Corsair LL140mm fans to my Obsidian 1000D case and even though I have enough 4-pin fan connecters (I have used some fan splitters to my commander pro), Im missing some if not all the RBG connecters.

 

My question is: How do I solve this problem? I have tried to look at the Corsair RGB Fan LED Hub but it does only have 6 RBG slots and I need 13..

 

Pls help :D

20200630_145649.thumb.jpg.627edfedc9932a038dba9bfa27044e91.jpg

20200630_145803.thumb.jpg.4836787cd71556432895bdab09d95441.jpg

20200630_145756.thumb.jpg.94c0d6c616df177e376748a5b0334f11.jpg

Link to comment
Share on other sites

The signature is at the bottom of my post. There's a section for "Helpful Links and FAQs".

And yes, 3 hubs would do the trick. You'd also need 3 channels. So ... the CoPro + a NoPro.

 

If you got the fans in multipacks, you'll have everything you need.

Link to comment
Share on other sites

Found it! Thank you very much :)

Sadly I didnt buy my fans in multipacks..

Would you recommend me getting 2 CORSAIR Lighting Node PROs just to be sure?

One of the LED slots in my commander pro is already in use by the Obsidian 1000d Case.

Link to comment
Share on other sites

Yes, the power cable is fine.

 

The 1000D has a pass-through at the end of the front panel LEDs that you can connect the fan hub to.

And just one LNP will do for the fans. But ... you might want more. RGBz are addictive.

Link to comment
Share on other sites

 Share

×
×
  • Create New...