rollinsw0llen Posted June 19, 2020 Share Posted June 19, 2020 Hello all, I'm new to the RGB world. I just bought the Carbide Series SPEC-DELTA RGB Tempered Glass Mid-Tower ATX Gaming Case because it came with the RGB lights. My motherboard does not have the RBG header so I ordered the commander pro to hook it up. I can hook up my fans to the CP and the fans spin, but there is another hookup for the RBG connections. I found a cable online that allows me to hook up the connection to the LED1 port on the commander pro. The lights will still not turn on and my iCue software does not do anything as well. Does anyone have any insight on what I might be doing wrong? **I've tried emailing and tweeting Corsair support with no luck after a week. Link to comment Share on other sites More sharing options...
DevBiker Posted June 19, 2020 Share Posted June 19, 2020 The SPEC-DELTA fans are 12V analog RGB. The Commander Pro controls 5V Digital (Addressable) RGB. You need to have the motherboard headers. Link to comment Share on other sites More sharing options...
rollinsw0llen Posted June 19, 2020 Author Share Posted June 19, 2020 well crap, I was assuming that was the issue, but was hoping for a different answer. Thanks for the tip, I guess I'll be replacing them then. Link to comment Share on other sites More sharing options...
rollinsw0llen Posted June 19, 2020 Author Share Posted June 19, 2020 So do you have any suggestions on what fans would work with my setup? Since I don't have the RGB MB header. I've been looking online but see almost all of them as having 12V Link to comment Share on other sites More sharing options...
Recommended Posts