Jump to content
Corsair Community

115i platinum & Gigabyte Z390 Master


LuZiFeR67
 Share

Recommended Posts

Hello all,

 

since yesterday i have a new machine. With Corsair 115i platinum and a Gigabyte Z390 Master Motherboard.

 

But there ist one Question:

 

How should i connect the Cosair Power-Cable (3 Pins, one line) to the Motherboard.

 

I connected it to a SYS5/Pump connector, but the display of the Monitoring are showing weird values (~4000)..

 

Is it the correct connector? Should i Change some configurations?

 

In the Bios i see the Throughput of the water cooling in the Details, but not in the OS or the bios overview…

 

Any suggestions :)

 

Kind regards

Christoph

Link to comment
Share on other sites

The odd speed reading is normal as well. Pumps and fans don't really count revolutions the same way. Corsair pumps have a divider of 2 to normalize it, but on some models and motherboards it reads the raw value. The BIOS will always see exactly double the expected speed. In iCUE, you will see the correct pump speed for all three settings.
Link to comment
Share on other sites

 Share

×
×
  • Create New...