Jump to content
Corsair Community

i can't change QL's RGB via iCue


Tarwada
 Share

Recommended Posts

hello. i have 6 QL fans connected to the lighting node core and to the commander pro. when i try to change the RGB effect, nothing changes. i can only change the FANS curve and speed. but the RGB is stuck to defaults. (rainbow). everything is updated. i selected QL fans and selected " fans are connected". then i can't change anything. sometimes when i select come effect (rain for example) my keyboard effect change to rain instead of the fans. any ideas ?

wSXsW7W.png

Link to comment
Share on other sites

You've "set-up the lighting" for the QL in the Commander, but that's not the device that will control the lighting. You can set it LL x 3, Hydro X, or anything else and it will show the graphic, but real control requires the device the fans are connected to -- the Lighting Node Core. That device will (should) show up separately in iCUE at the top. Check your USB 2 connection from the Core. If you are using the Commander USB passthrough port, try the MB directly.
Link to comment
Share on other sites

 Share

×
×
  • Create New...