snobrder Posted April 13, 2005 Share Posted April 13, 2005 Hi Mr Ram Guy, i wanted to add ram to my ibm t30 (2366-91U) that came with 256MB. i bought VS512SDS266 and put it in the second slot, but it was not recognized. i removed the 256, installed the 512 in the first slot and it is seen by the system. BUT, if i put the 256 in the second slot, it is not seen. i have 512mb, but 768 would be better right? am i trying to do something that cant be done or is there another product that i can use that would allow adding to my original 256. or am i stuck and i should just chop up this 256 stick and toss it in my soup :laughing: thank you for your time tjm Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 13, 2005 Corsair Employees Share Posted April 13, 2005 With this system, you may want to use our System Select modules, CMSS512MB-266SOD. However, I would not suggest mixing memory with our Value Select line of modules. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.