Jump to content
Corsair Community

Problem with RGB Fans not lighting up


Dirk0minati
 Share

Recommended Posts

This is a problem I've dealt with over a couple of sessions of trying.

 

I have a Corsair iCUE 220T RGB case with 3 front fans w/ RGB.

 

Problem is, they are not working... The fans DO work, the RGB just doesn't.

 

What I did to install:

 

So the the lighting node came pre installed with the 3 fans connected, only thing I needed to do, was to connect the node to my PSU with SATA power and connect the USB to a USB 2.0 header on the motherboard. I connected all the things, but it still doesn't work.. I did also download the iCUE program / Controller.

 

 

 

Any help would be appreciated, thanks in advance.

Edited by Dirk0minati
Link to comment
Share on other sites

SP120 RGB Pro series fans should be correct, yes. I made the same mistake to use the older SP120 RGB fans before.

then please check if

- the rgb headers are in the correct ports on the node, they must be in ports 1-3

- check if you have the correct lighting channel selected in iCue

- check the fans one by one - if you happen to have gotten a bad fan in the first port, the other 2 won't work as well

Link to comment
Share on other sites

 Share

×
×
  • Create New...