Jump to content
Corsair Community

x680 with 6 LL Series Fans Not Working


Recommended Posts

Hello everyone,

 

This is my first attempt at building a case with custom lighting.

 

I bought the x680 and the entire system seems straight forward to put together.

 

About an hour ago, I have everything plugged up and running but I am having an issue.

 

So, the case itself has 3 LL Series fans, and I ordered 3 more LL Series fans to utilize the full 6 ports the case comes with. Upon starting up the system, I get the front 3 LED fans showing up and the 3 newly bought fans not showing up. So, I loaded up iCue (v3.28.70) and noticed the Lighting Channel 1 was setup wrong.

 

I changed the Lighting Channel 1 to "LL RGB Series Fans" and "6 Fans are connected". Nothing changed. Same front 3 fans with lights and 3 new fans not lighting.

 

Then, I swapped fans 4, 5, and 6 (newly bought fans) to ports 1, 2, and 3 and fans 1, 2, and 3 (front 3 case fans) to ports 4, 5, and 6. Now the newly installed fans show up but the front 3 fans are not lighting.

 

So, my natural instinct is to think that the LED Hub ports 4, 5, and 6 are busted (or at least port 4 is, making port 5, and 6 bad).

 

Is there anything else I am missing?

 

Any help would be greatly appreciated.

Link to comment
Share on other sites

Well, I wanted to make sure the Lighting Node Pro wasn't the problem and just swapped from lighting channels 1 to lighting channels 2. Then changed settings in iCue.

 

Same problem persists.

Link to comment
Share on other sites

I already swapped fan 3 on port 3 with fan 4 on port 4 (to be fan 3 on port 4, fan 4 on port 3).

 

Fan 4’s LED worked but Fan 3’s LED stopped.

Edited by Zyllos
Link to comment
Share on other sites

It def sounds like that's the problem mate.

I'm guessing you don't have a spare you can swap in to validate that?

 

No I do not. I ordered the X680 and got a bad RGB Hub.

Edited by Zyllos
Link to comment
Share on other sites

 Share

×
×
  • Create New...