Jump to content
Corsair Community

Are the SATA cables for a HX750 unmarked?


jmike
 Share

Recommended Posts

Going through and reorganizing some loose PC parts and have a few modular PSU cables that are unmarked. I’m 90% sure these go to my HX750 but the issue is every cable with that PSU is marked “TXM/HX/AXi only”on the PSU end connector however these are blank. The only modular PSUs I’ve owned are:

* Tagan BZ(does not match its connector style)

* Corsair

* EVGA (does not match their cable style)

 

I have worked on and built PCs for folks who’s modular PSU wasn’t a Corsair, though I can’t imagine not leaving unused cables in their box. Also though the cables I’m questioning have similar cable training as the Molex and PCI-E cables that are marked HX.

 

My luck would be if I just assumed, these would bite me if I ever need to use that PSU though these cables I’m questioning have very similar cable training bends to the rest of the HX ‘s.

Edited by jmike
Link to comment
Share on other sites

  • Corsair Employees

Corsair PSU's have had marked cables ever since Type 3 came out (originally labeled as "TXM/HX/AXi Only")

 

Odds are these are for something else.

 

But if you have a DMM, you can plug it in and make sure the correct voltages are on the correct pins and that will tell you where the cables came from.

Link to comment
Share on other sites

 Share

×
×
  • Create New...