Jump to content
Corsair Community

NewB Questions for TWINX2048-3200C2PT


ejMac

Recommended Posts

I'm new @ running memory at it's highest setting. Can someone tell me what would be the best config for my setup. Also, why is the SPD set at 3.3.3.8 when the specs say is can run at 2.3.3.6? Here is my current rig specs:

 

Mobo = A8N-SLI Deluxe BIOS VER. 1006 3/3/2005

CPU = AMD 64 4000+

VPU = ATI RADEON X850xt(MSI)

MEMORY = TWINX2048-3200C2PT

HD = 2x 74Gig Raptors Raid 0

PWR Supply = OCZ-450 12U

CASE = LIAN LI

 

Any help would be much appreciated! I'm trying to get the most out of the memory as possible. Thanks.

Link to comment
Share on other sites

The SPD for the 3200C2s is set to JEDEC spec. Just change it to the correct settings:

 

CAS Latency: 2.0 on Intel, 2.5 on AMD

RAS to CAS Delay (tRCD): 3

Row Precharge (tRP): 3

Active to Precharge Delay (tRAS): 6

 

Memory voltage: 2.7x or 2.8 volts

All other settings to defaults.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...