Jump to content
Corsair Community

LL120 fans all of a sudden not lighting up.


larusjr
 Share

Recommended Posts

I have had 6x LL120 fans working just fine for a just over a year after a lot of googling and hassle to get them to work properly. Now 4 of my 6 fans do not light up. I am almost at the point where I format my computer to try to get them working after testing almost everything I have found and read regarding those fans. They started working again after I uninstalled my asus soundcard drivers, but now they stopped working again.

 

 

Things I have tried:

Unistalled the software after it updated, cleaned the registry and reverted to older version of iCue - did not work

 

I have extra set of the lighning node pro, so I have tested switching that out, did not work.

 

I have reordered the fans but only 1 and 2 light up on the node, all the fans work fine if I put the in slots 1 and 2, it was the same on the extra lightning node pro, so it is not the hub that is faulty and from reordering the fans seems like it is not the connection between the fans.

 

Connected the to a different usb outlet - did not work.

 

Connected to a different power supply connector - did not work

 

I am at the end of my rope here and I just hate not having something working as it should.

 

Does any one here have had a similar problem and could help me out here?

 

 

best regards,

 

ps. I have also had problems with the memory lighting, It is supposed to be static red, but all too often it decides to change color, even though iCue shows it still as red

 

Corsair devices

-----------------------------------------------------

Device name : Corsair Corsair Gaming K65 LUX RGB Keyboard 1402C033AF0D2029592AD078F5001940

Status : DeviceConnected (0x1)

Working speed : Full Speed (0x1)

Connected to : USB xHCI Compliant Host Controller ? Root Hub ? Port 3 ? GenesysLogic USB2.0 Hub ? Port 3

USB VID : 0x1b1c

USB PID : 0x1b37

Hub driver : Standard, USB 3.0

Device supports USB 3.0 :

Device support flags :

Port protocol support :

-----------------------------------------------------

Device name : Corsair H150i Platinum 7289_2.0

Status : DeviceConnected (0x1)

Working speed : Full Speed (0x1)

Connected to : USB xHCI Compliant Host Controller ? Root Hub ? Port 4

USB VID : 0x1b1c

USB PID : 0xc12

Hub driver : Standard, USB 3.0

Device supports USB 3.0 :

Device support flags :

Port protocol support :

-----------------------------------------------------

Device name : Corsair Lighting Node PRO 0FB00116C7940EAFD5034859411900F5

Status : DeviceConnected (0x1)

Working speed : Full Speed (0x1)

Connected to : USB xHCI Compliant Host Controller ? Root Hub ? Port 11

USB VID : 0x1b1c

USB PID : 0xc0b

Hub driver : Standard, USB 3.0

Device supports USB 3.0 :

Device support flags :

Port protocol support :

Physical memory

-----------------------------------------------------

Manufacturer : Corsair

Serial number : 00000000

Model : CMR16GX4M2C3200C16

Speed : 2133

Form factor : DIMM

Memory type : Unknown

Capacity : 8589934592

-----------------------------------------------------

Manufacturer : Corsair

Serial number : 00000000

Model : CMR16GX4M2C3200C16

Speed : 2133

Form factor : DIMM

Memory type : Unknown

Capacity : 8589934592

 

Logs:

2020-04-27T20:20:06 I cue.init: iCUE version: 3.28.70

2020-04-27T20:20:06 I cue.init: Updates server: https://www3.corsair.com/software/CUE_V3/

2020-04-27T20:20:06 I cue.init: Build type: Public Release

2020-04-27T20:20:06 I cue.init: Applicaiton ID: 10928

2020-04-27T20:20:07 W cue.locale: Cannot find dir for qt *.qm files

2020-04-27T20:20:07 I cue.init.font: Using Regular text font family: "Open Sans"

2020-04-27T20:20:07 I cue.init.font: Using Title text font family: "Gotham Bold"

2020-04-27T20:20:07 I cue.hid_device_detector: Start worker thread.

2020-04-27T20:20:07 I cue.devices.enum.hid: Leaving working state. DeviceEnumeratorBase::WorkingStateChangeReason::UserSessionPropertyChanged Session disallowed.

2020-04-27T20:20:07 I cue.devices.enum.router: Leaving working state. DeviceEnumeratorBase::WorkingStateChangeReason::UserSessionPropertyChanged Session disallowed.

2020-04-27T20:20:07 I cue.devices.enum.clink: Leaving working state.

2020-04-27T20:20:07 I cue.plugin: Trying to load library: "C:/Program Files (x86)/Corsair/CORSAIR iCUE Software/plugins/ASUS/asus_motherboard_plugin.dll"

2020-04-27T20:20:07 I cue.plugin: Library is loading, will check if it's plugin: "ASUS/asus_motherboard_plugin.dll"

2020-04-27T20:20:07 I cue.plugin: Trying to load library: "C:/Program Files (x86)/Corsair/CORSAIR iCUE Software/plugins/Lenovo/CUEPlugin.dll"

2020-04-27T20:20:07 I cue.plugin: Library is loading, will check if it's plugin: "Lenovo/CUEPlugin.dll"

2020-04-27T20:20:07 I cue.plugin: Trying to load library: "C:/Program Files (x86)/Corsair/CORSAIR iCUE Software/plugins/OriginPC/CUEOPCPlugin.dll"

2020-04-27T20:20:07 I cue.plugin: Library is loading, will check if it's plugin: "OriginPC/CUEOPCPlugin.dll"

2020-04-27T20:20:07 I cue.actions.macro.win: Init time: 0.401743 (init: 2e-07 reset: 0.0015259 )

2020-04-27T20:20:07 I cue.devices.enum.phost: Leaving working state.

2020-04-27T20:20:07 W cue.plugin: Processing already finished

2020-04-27T20:20:07 W cue.plugin: Processing already finished

2020-04-27T20:20:07 W cue.plugin: Processing already finished

2020-04-27T20:20:07 I cue.profiles.folders.tree: Profile order deserialization started: "C:\\Users\\Lárus\\AppData\\Roaming\\Corsair\\CUE/profiles/tree.cueprofileorder"

2020-04-27T20:20:07 I cue.profiles.folders.tree: Profile order deserialization finished: "C:\\Users\\Lárus\\AppData\\Roaming\\Corsair\\CUE/profiles/tree.cueprofileorder"

2020-04-27T20:20:07 W cue.clink.ocp.storage: OcpSettings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 I cue.devices.enum.dram: Leaving working state.

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 I cue.ro_helpers: LLAccessIpcClient(0xc030ac8) Start connecting to host QUrl("tcp://127.0.0.1:50709")

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Actions load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.library: Actions load failed: Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 W cue.dpi.manager: "C:\\Users\\Lárus\\AppData\\Roaming\\Corsair\\CUE/dpi" Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:07 I cue.ro_helpers: LLAccessIpcClient(0xc030ac8) Successfully connected to host node at QUrl("tcp://127.0.0.1:50709")

2020-04-27T20:20:07 I cue.llaccess: Controller 0 : Bus capabilities: 7 Max block size: 32

2020-04-27T20:20:07 I cue.llaccess: Northbridge: Intel Coffee Lake

2020-04-27T20:20:07 I cue.llaccess: Southbridge: Z390

2020-04-27T20:20:07 I cue.llaccess: Slot count: 4

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 W QObject::disconnect: Unexpected null parameter

2020-04-27T20:20:07 I cue.session: Locked changed to false

2020-04-27T20:20:07 I cue.session: Local changed to true

2020-04-27T20:20:07 I cue.session.win: Will notify 'connected changed to' with delay

2020-04-27T20:20:08 I cue.hw_profile.manager: Start worker thread.

2020-04-27T20:20:08 C cue.buttons_lib: "Loading of buttons library failed!" Could not detect cereal root node - likely due to empty or invalid input

2020-04-27T20:20:08 I cue.session: Connected changed to true

2020-04-27T20:20:08 I cue.sdk: Entering working state, session connected.

2020-04-27T20:20:08 I cue.sdk: Starting router.

2020-04-27T20:20:08 I cue.sdk.device_watcher: Start prepare RestoreDeviceOrderState

2020-04-27T20:20:08 I cue.sdk.device_watcher: Finish prepare RestoreDeviceOrderState

2020-04-27T20:20:08 I cue.clink.device.hw_lightings: Working state about to change, lock hw lights preview.

2020-04-27T20:20:08 I cue.sdk.automation.server: User session about to be unlocked. Starting a listening

2020-04-27T20:20:08 I cue.sdk.automation.server: Successfully started listening

2020-04-27T20:20:08 I cue.devices.enum.hid: Entering working state. DeviceEnumeratorBase::WorkingStateChangeReason::UserSessionPropertyChanged Session allowed.

2020-04-27T20:20:08 W cue.hid_device_detector: Device detector already disabled.

2020-04-27T20:20:08 I cue.devices.enum.router: Entering working state. DeviceEnumeratorBase::WorkingStateChangeReason::UserSessionPropertyChanged Session allowed.

2020-04-27T20:20:08 I cue.devices.enum.clink: Entering working state.

2020-04-27T20:20:08 I cue.devices.enum.phost: Entering working state.

2020-04-27T20:20:08 I cue.devices.enum.dram: Entering working state.

2020-04-27T20:20:08 I cue.clink.device.hw_lightings: Entering working state, unlock and disable hw lights preview.

2020-04-27T20:20:08 C cue.plugin.aura_sdk_controller: Failed call to create instance of AuraSdk with HRESULT: "0xFFFFFFFF80040154"

2020-04-27T20:20:08 I cue.plugin: Received deviceStatusChanged

2020-04-27T20:20:08 I cue.hid_device_detector: DeviceInstance(Path: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col04#7&20b2df89&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}", InstanceId: "hid\\vid_1b1c&pid_1b37&mi_01&col04\\7&20b2df89&0&0003", ParentInstanceId: "USB\\VID_1B1C&PID_1B37\\1402C033AF0D2029592AD078F5001940\u0000") inserted.

2020-04-27T20:20:08 I cue.hid_device_detector: Add open task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col04#7&20b2df89&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}" with delay 0 ms.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=beef, pid=feed) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=beef, pid=feed) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=46d, pid=c332) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=beef, pid=feed) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=46d, pid=c332) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=46d, pid=c232) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=46d, pid=c332) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=46d, pid=c332) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=46d, pid=c231) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=beef, pid=feed) not found.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=b05, pid=1743) not found.

2020-04-27T20:20:08 I cue.hid_device_detector: DeviceInstance(Path: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col01#7&20b2df89&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}\\kbd", InstanceId: "hid\\vid_1b1c&pid_1b37&mi_01&col01\\7&20b2df89&0&0000", ParentInstanceId: "USB\\VID_1B1C&PID_1B37\\1402C033AF0D2029592AD078F5001940\u0000") inserted.

2020-04-27T20:20:08 I cue.hid_device_detector: Add open task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col01#7&20b2df89&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}\\kbd" with delay 0 ms.

2020-04-27T20:20:08 I cue.devices: Device vid=1b1c pid=c0b ignored by HidDeviceEnumerator

2020-04-27T20:20:08 I cue.hid_device_detector: DeviceInstance(Path: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_02#7&8a584a0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}", InstanceId: "hid\\vid_1b1c&pid_1b37&mi_02\\7&8a584a0&0&0000", ParentInstanceId: "USB\\VID_1B1C&PID_1B37\\1402C033AF0D2029592AD078F5001940\u0000") inserted.

2020-04-27T20:20:08 I cue.hid_device_detector: Add open task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_02#7&8a584a0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" with delay 0 ms.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=46d, pid=c332) not found.

2020-04-27T20:20:08 I cue.hid_device_detector: DeviceInstance(Path: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_00#7&38766bce&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}\\kbd", InstanceId: "hid\\vid_1b1c&pid_1b37&mi_00\\7&38766bce&0&0000", ParentInstanceId: "USB\\VID_1B1C&PID_1B37\\1402C033AF0D2029592AD078F5001940\u0000") inserted.

2020-04-27T20:20:08 I cue.hid_device_detector: Add open task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_00#7&38766bce&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}\\kbd" with delay 0 ms.

2020-04-27T20:20:08 I cue.devices: Manifest for device (vid=46d, pid=c332) not found.

2020-04-27T20:20:08 I cue.hid_device_detector: DeviceInstance(Path: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col02#7&20b2df89&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}", InstanceId: "hid\\vid_1b1c&pid_1b37&mi_01&col02\\7&20b2df89&0&0001", ParentInstanceId: "USB\\VID_1B1C&PID_1B37\\1402C033AF0D2029592AD078F5001940\u0000") inserted.

2020-04-27T20:20:08 I cue.hid_device_detector: Add open task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col02#7&20b2df89&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}" with delay 0 ms.

2020-04-27T20:20:08 I cue.hid_device_detector: DeviceInstance(Path: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col03#7&20b2df89&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}", InstanceId: "hid\\vid_1b1c&pid_1b37&mi_01&col03\\7&20b2df89&0&0002", ParentInstanceId: "USB\\VID_1B1C&PID_1B37\\1402C033AF0D2029592AD078F5001940\u0000") inserted.

2020-04-27T20:20:08 I cue.hid_device_detector: Add open task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col03#7&20b2df89&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}" with delay 0 ms.

2020-04-27T20:20:08 I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col04#7&20b2df89&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}" opened.

2020-04-27T20:20:08 C cue.hid_device_detector: Failed to open: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col01#7&20b2df89&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}\\kbd"

2020-04-27T20:20:08 I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_02#7&8a584a0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" opened.

2020-04-27T20:20:08 C cue.hid_device_detector: Failed to open: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_00#7&38766bce&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}\\kbd"

2020-04-27T20:20:08 I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col02#7&20b2df89&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}" opened.

2020-04-27T20:20:08 I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col03#7&20b2df89&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}" opened.

2020-04-27T20:20:08 I cue.hid_device_detector: Mark all tasks as finished.

2020-04-27T20:20:08 I cue.devices: Begin attaching to "K65 LUX RGB" (vid=1b1c, pid=1b37) "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col04#7&20b2df89&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}" status b= 0

2020-04-27T20:20:08 I cue.devices: End attaching to "K65 LUX RGB" (vid=1b1c, pid=1b37) "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col04#7&20b2df89&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}" status a= 0

2020-04-27T20:20:08 I cue.devices: Created new device"K65 LUX RGB" (vid=1b1c, pid=1b37); ready:false

2020-04-27T20:20:08 I cue.devices: Begin attaching to "K65 LUX RGB" (vid=1b1c, pid=1b37) "\\\\?\\hid#vid_1b1c&pid_1b37&mi_02#7&8a584a0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" status b= 0

2020-04-27T20:20:08 I cue.devices: End attaching to "K65 LUX RGB" (vid=1b1c, pid=1b37) "\\\\?\\hid#vid_1b1c&pid_1b37&mi_02#7&8a584a0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" status a= 1

2020-04-27T20:20:08 I cue.devices: Initializing "K65 LUX RGB" (vid=1b1c, pid=1b37)

2020-04-27T20:20:08 I cue.devices: Begin attaching to "K65 LUX RGB" (vid=1b1c, pid=1b37) "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col02#7&20b2df89&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}" status b= 1

2020-04-27T20:20:08 I cue.devices: End attaching to "K65 LUX RGB" (vid=1b1c, pid=1b37) "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col02#7&20b2df89&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}" status a= 1

2020-04-27T20:20:08 I cue.devices: Begin attaching to "K65 LUX RGB" (vid=1b1c, pid=1b37) "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col03#7&20b2df89&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}" status b= 1

2020-04-27T20:20:08 I cue.devices: End attaching to "K65 LUX RGB" (vid=1b1c, pid=1b37) "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col03#7&20b2df89&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}" status a= 1

2020-04-27T20:20:08 I cue.devices: Initialized true "K65 LUX RGB" (vid=1b1c, pid=1b37)

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 I cue.lightings.direct_player: Started lighting worker in 0x30f4

2020-04-27T20:20:08 W cue.devices.layout: Invalid HW layout

2020-04-27T20:20:08 C cue.manifest: Cannot find "" layout for 0x9e4bc30

2020-04-27T20:20:08 C cue.server.device: Unknown device type: 0

2020-04-27T20:20:08 C cue.server.device: Unknown device type: 10

2020-04-27T20:20:08 C cue.server.device: Unknown device type: 11

2020-04-27T20:20:08 C cue.server.device: Unknown device type: 12

2020-04-27T20:20:08 C cue.server.device: Unknown device type: 13

2020-04-27T20:20:08 I cue.devices: Device insertion processing complete for K65 LUX RGB (vid=1b1c, pid=1b37)

2020-04-27T20:20:08 C cue.devices: Unknown command in NxpPhysicalHidDevice: AbstractCommand::SetDpiBrightnessLevel

2020-04-27T20:20:08 C cue.devices: Unknown command in NxpPhysicalHidDevice: AbstractCommand::GetLightingMode

2020-04-27T20:20:09 C cue.firmware.index: Incorrect index contents: fw obj is empty "combined-image"

2020-04-27T20:20:09 I cue.firmware.index: "K65 LUX RGB" firmware update, expected version: 3.8 update available, on device: bootloader: 0.14 firmware: 2.5

2020-04-27T20:20:09 I cue.firmware.download: FW update available for "K65 LUX RGB" BLD & FW: "0.14" "2.5" On server: QMap((fwutil::FirmwareType::Application, 3.8))

2020-04-27T20:20:09 I cue.devices.dram: Module created (0:59) CMR16GX4M2C3200C16 Slot: 1

2020-04-27T20:20:09 I cue.devices.dram: Module created (0:5b) CMR16GX4M2C3200C16 Slot: 3

2020-04-27T20:20:09 W cue.devices.dram: Unsupported command in DramPhysicalDevice: AbstractCommand::SetDpiBrightnessLevel

2020-04-27T20:20:09 W cue.devices.dram: Unsupported command in DramPhysicalDevice: AbstractCommand::GetAutoDetectedLedChannelTypes

2020-04-27T20:20:09 W cue.devices.dram: Unsupported command in DramPhysicalDevice: AbstractCommand::GetConnectedLedChannelCounts

2020-04-27T20:20:09 W cue.devices.dram: Unsupported command in DramPhysicalDevice: AbstractCommand::GetLightingMode

2020-04-27T20:20:09 I cue.lightings.direct_player: Started lighting worker in 0x3368

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 0

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 10

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 11

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 12

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 13

2020-04-27T20:20:09 I cue.devices: Device insertion processing complete for VENGEANCE RGB (vid=1b1c, pid=402)

2020-04-27T20:20:09 C cue.devices: Unknown command in CLinkDeviceProtocolBase: AbstractCommand::SetDpiBrightnessLevel

2020-04-27T20:20:09 C cue.devices: Unknown command in CLinkDeviceProtocolBase: AbstractCommand::GetAutoDetectedLedChannelTypes

2020-04-27T20:20:09 C cue.devices: Unknown command in CLinkDeviceProtocolBase: AbstractCommand::GetConnectedLedChannelCounts

2020-04-27T20:20:09 C cue.devices: Unknown command in CLinkDeviceProtocolBase: AbstractCommand::GetLightingMode

2020-04-27T20:20:09 I cue.lightings.direct_player: Started lighting worker in 0x25ec

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 0

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 10

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 11

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 12

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 13

2020-04-27T20:20:09 I cue.devices: Device insertion processing complete for Lighting Node Pro (vid=1b1c, pid=c0b)

2020-04-27T20:20:09 C cue.devices: Unknown command in CLinkDeviceProtocolBase: AbstractCommand::GetLightingMode

2020-04-27T20:20:09 I cue.lightings.direct_player: Started lighting worker in 0x116c

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 0

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 10

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 11

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 12

2020-04-27T20:20:09 C cue.server.device: Unknown device type: 13

2020-04-27T20:20:09 I cue.devices: Device insertion processing complete for H150i PRO (vid=1b1c, pid=c12)

2020-04-27T20:20:09 W cue.devices.enum.demo: Registration of device with unsupported DemoUsbId: (vid=0, pid=0)

2020-04-27T20:20:09 I cue.sdk.device_watcher: Start prepare WorkingStateState

2020-04-27T20:20:09 I cue.sdk.device_watcher: Finish prepare WorkingStateState

2020-04-27T20:20:09 C cue.firmware.index: Incorrect index contents: fw obj is empty "combined-image"

2020-04-27T20:20:09 I cue.firmware.index: "Lighting Node Pro" firmware update, expected version: 0.10.4 same version found, on device: bootloader: 2.0 firmware: 0.10.4

2020-04-27T20:20:09 C cue.firmware.index: Incorrect index contents: fw obj is empty "combined-image"

2020-04-27T20:20:09 I cue.firmware.index: "H150i PRO" firmware update, expected version: 1.0.4 same version found, on device: bootloader: -1.-1 firmware: 1.0.4.0

2020-04-27T20:20:28 I cue.devices.set: Requesting working state leave because of transition to Shutdown state.

2020-04-27T20:20:28 I cue.devices.enum.dram: Leaving working state.

2020-04-27T20:20:28 I cue.lightings.direct_player: Stopped lighting worker in 0x3368

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 0

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 10

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 11

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 12

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 13

2020-04-27T20:20:28 I cue.devices.enum.phost: Leaving working state.

2020-04-27T20:20:28 W cue.plugin: Processing already finished

2020-04-27T20:20:28 W cue.plugin: Processing already finished

2020-04-27T20:20:28 W cue.plugin: Processing already finished

2020-04-27T20:20:28 I cue.devices.enum.clink: Leaving working state.

2020-04-27T20:20:28 I cue.lightings.direct_player: Stopped lighting worker in 0x116c

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 0

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 10

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 11

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 12

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 13

2020-04-27T20:20:28 I cue.lightings.direct_player: Stopped lighting worker in 0x25ec

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 0

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 10

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 11

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 12

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 13

2020-04-27T20:20:28 I cue.devices.enum.router: Leaving working state. DeviceEnumeratorBase::WorkingStateChangeReason::ApplicationQuit Session allowed.

2020-04-27T20:20:28 I cue.devices.enum.hid: Leaving working state. DeviceEnumeratorBase::WorkingStateChangeReason::ApplicationQuit Session allowed.

2020-04-27T20:20:28 I cue.lightings.direct_player: Stopped lighting worker in 0x30f4

2020-04-27T20:20:28 I cue.hid_device_detector: Add close task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col02#7&20b2df89&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}"

2020-04-27T20:20:28 I cue.hid_device_detector: Add close task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col04#7&20b2df89&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}"

2020-04-27T20:20:28 I cue.hid_device_detector: Add close task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_02#7&8a584a0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

2020-04-27T20:20:28 I cue.hid_device_detector: Add close task: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col03#7&20b2df89&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"

2020-04-27T20:20:28 I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col02#7&20b2df89&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}" closed.

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 0

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 10

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 11

2020-04-27T20:20:28 I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col04#7&20b2df89&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}" closed.

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 12

2020-04-27T20:20:28 C cue.server.device: Unknown device type: 13

2020-04-27T20:20:28 I cue.hid_device_detector: Wait on finish starts.

2020-04-27T20:20:28 I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_02#7&8a584a0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" closed.

2020-04-27T20:20:28 I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_1b37&mi_01&col03#7&20b2df89&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}" closed.

2020-04-27T20:20:28 I cue.hid_device_detector: Mark all tasks as finished.

2020-04-27T20:20:28 I cue.hid_device_detector: Wait on finish complete.

2020-04-27T20:20:28 I cue.hid_device_detector: Stop working.

2020-04-27T20:20:28 I cue.sdk: Leaving working state, because of transition to Suspended or Shutdown state.

2020-04-27T20:20:28 I cue.sdk: Stopping router.

2020-04-27T20:20:28 I cue.init: Forcing profile saving.

2020-04-27T20:20:28 I cue.init: Forcing widget list saving.

2020-04-27T20:20:28 I cue.sdk.automation.server: Transition to Suspended or Shutdown power state. Stopping a listening

2020-04-27T20:20:28 I cue.sdk.automation.server: Successfully stopped listening

2020-04-27T20:20:28 I cue.profiles.folders.tree: Profile order serialization started: "C:\\Users\\Lárus\\AppData\\Roaming\\Corsair\\CUE/profiles/tree.cueprofileorder"

2020-04-27T20:20:28 I cue.profiles.folders.tree: Profile order serialization finished: "C:\\Users\\Lárus\\AppData\\Roaming\\Corsair\\CUE/profiles/tree.cueprofileorder"

2020-04-27T20:20:28 I cue.precise_timer: Suspended or shutdown state, stopping timer 36

Edited by larusjr
Link to comment
Share on other sites

  • 3 weeks later...
 Share

×
×
  • Create New...