Jump to content
Corsair Community

PC won't boot after installing LL120 RGB with Lighting Node PRO


fire1989
 Share

Recommended Posts

Hey there, need some help please.

As the title says, my PC won't boot after installing the fans as per manual. It was working totally fine before installing the fans.

After installation i turned the power on and the fan leds turned on but the fans didn't spin. The PC didnt boot at all so wasn't able to get to the iCUE software which was installed as i have a corsair keyboard with RGB as well.

I went back on my steps, disconnected all cables including the sata from the PSU and still nothing.

Checked on the BIOS and all booting info is correct, the GPU, CPU and M.2 drives (boot and data) are all being recognized by the MOBO.

This is the fans i got: https://www.amazon.com/dp/B075VGN4M1/ref=cm_sw_r_em_apa_i_CJrPEb5M909FQ

 

This is my hardware info:

Asus PRIME X570-PRO ATX AM4 Motherboard

AMD Ryzen 7 3700X 3.6 GHz 8-Core Processor

G.Skill Trident Z Neo 32 GB (2 x 16 GB) DDR4-3600 Memory

Samsung 970 Evo Plus 250 GB M.2-2280 NVME Solid State Drive

Sapphire Radeon RX 5700 XT 8 GB NITRO+ Video Card

EVGA SuperNOVA G3 1000 W 80+ Gold Certified Fully Modular ATX Power Supply

 

Please help me!

Edited by fire1989
Link to comment
Share on other sites

 Share

×
×
  • Create New...