Jump to content
Corsair Community

Can I OC my Vengeance 2x16 savely to more then 3200?


TomTom1298
 Share

Recommended Posts

Hi!

 

I recently made the upgrade to 32gb, but I still struggle with a bit the need more ram.

 

However my RAM-Slots are all taking. And so upgrading to more sticks is not possible. 64GB would be a overkill. So, can I OC Corsair Vengeance RGB Pro 32 GB (2 x 16 GB) DDR4-3200 Kit to even higher then 3200MHZ?

 

I’m using Premiere Pro with the needed plugins and effects.

Link to comment
Share on other sites

It is always a gamble on what overclocks you will get with anything. You can check what ICs you have on the ram buy the version number. And look in the DDR 4 forum and match the numbers to see what ICs they have. Or do some simple math.

 

Samsung B-die Ics is everyone's go-to ram now. Found by the tight timings on them in series. 14-14-14, 15-15-15, etc. But sometimes they are even in odd timings such as 15-16-16-16, 16-18-18-18, etc

 

I would try the next speed up in the bios and see if it boots. If not give it a little more voltage. Or just set it to 1.4 volts and leave it. It might boot straight up and or you may even get to tighten the timings more or have to relax them a bit for higher speeds.

 

Is it an AMD system or an Intel system?

Link to comment
Share on other sites

 Share

×
×
  • Create New...