gienah Posted April 22, 2020 Share Posted April 22, 2020 I took off the sails logo on the front on a Obsidian 1000d case, because I had to sleeve the cables (you know, had to, as in obsession), and now I want to put it back on and I'm confused as to what type are the 2 screws that hold it on? I guess they look like they are really tiny. Even a hint at whether they are machine screws or self tapping screws would help, thanks. Link to comment Share on other sites More sharing options...
gienah Posted April 23, 2020 Author Share Posted April 23, 2020 I have managed to screw it in, I used 2 of the very tiniest black countersunk phillips head machine screws that came with the case, in a bag of about 20 or maybe more of these tiny machine screws. Link to comment Share on other sites More sharing options...
Zotty Posted April 23, 2020 Share Posted April 23, 2020 http://i.imgur.com/IoFpMWBm.jpg the SSD screws?. not had chance to take my logo out as of yet so not sure what the OG ones look like... did you know they are available as spares?.. the logo's that is? http://i.imgur.com/kxImEypm.jpg Link to comment Share on other sites More sharing options...
gienah Posted April 23, 2020 Author Share Posted April 23, 2020 Yes its those tiny ones in the middle of your photo, thanks, I've now learned they are SSD screws that I used. I can't remember what type of screws were used originally. It doesn't take much to hold it on, so I'm sure its fine. Yes I had noticed that the Corsair sell the logo in some countries, thanks for the photo of the creative use of one. Link to comment Share on other sites More sharing options...
Recommended Posts