Jump to content
Corsair Community

Daisy-chained iCue Commander Pro's not working


jft1768
 Share

Recommended Posts

Hi,

 

I have two iCue Commander Pro's in my Corsair 1000D.

 

The first is running 5 Corsair ML140 Pro fans (3 on the radiator on the top of the rig, and two at the back of the case. This Commander Pro is plugged into a USB port on the motherboard (Gigabyte Z390 AORUS Master), and the SATA power connector is plugged into the chain that powers two of my SSDs.

 

The second commander pro runs 6 Corsair ML120 Pro fans on the radiator on the front of the case, and is plugged into the USB port on the first Commander Pro, and the SATA power connector is plugged into the chain that powers the other two of my SSDs.

 

The second commander pro was working fine at first, but now none of those fans are running or lighting. I've moved the USB connector to the other USB port on the 1st Commander Pro with no change. I tried plugging Commander Pro #2 directly into the motherboard, and that got the fans to light up in just white color, but no spinning of the fans. I have also tried plugging the SATA power cable into other SATA chains, and even installed one SATA chain all by itself, all with no change.

 

Any ideas on how to fix this? Thanks!

Link to comment
Share on other sites

 Share

×
×
  • Create New...