thomas_003 Posted April 6, 2005 Share Posted April 6, 2005 Hardware: - CPU: P4 2,4 HT 800Mhz FSB - MB: Gigabyte 8IG1000Pro - Bios RAM settings on default/automatic - 2* CMX512-3200C2 in dual mode - one v.1.2 - the other v.2.1 hi, first excuse me for my bad english :((, I'm from germany ;) a few days ago my win2k started to show some errors like this: memory cannot be "write"... so, I've done a ram test with memtest86 and found a lot of misstakes :( now I've testet the Modules separate (I know grammar is not correct :(: ) I have found a lot of errors on the v.1.2 ram, on the v.2.1 module were none I hope you can decipher the text and help me sincerely thomas Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 6, 2005 Corsair Employees Share Posted April 6, 2005 Please try and set the Dim Over Voltage Control to +.2 Volts and test the system with http://www.memtest.org to be sure. If you get errors please test them one at a time. Link to comment Share on other sites More sharing options...
thomas_003 Posted April 6, 2005 Author Share Posted April 6, 2005 thx for your endevours I have tested it with + 0.2V and there are already errors, but less then at normal voltage sincerely thomas edit: I will test it overnight again, I will report the results in ca 18 hours Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 6, 2005 Corsair Employees Share Posted April 6, 2005 Can you tell what you have the timings set to? Should be Cass 2.5-3-3-7 with 2 miss-matched modules! Link to comment Share on other sites More sharing options...
thomas_003 Posted April 7, 2005 Author Share Posted April 7, 2005 I have tested it overnight again and there were 77 error at 27 passes as CAS is 2.5-3-3-8 shown at the old ram sincerely thomas edit: with both modules CAS is already 2.5-3-3-8 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 7, 2005 Corsair Employees Share Posted April 7, 2005 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
thomas_003 Posted April 8, 2005 Author Share Posted April 8, 2005 I have seen that the second mudules CAS is 3-3-3-8, is that normal? mfg thomas Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 8, 2005 Corsair Employees Share Posted April 8, 2005 Well yes it can be, are you not using a Twinx set? Link to comment Share on other sites More sharing options...
thomas_003 Posted April 8, 2005 Author Share Posted April 8, 2005 no, I'm 17 and corsair ram is very expensive, so I couldn't buy both at same time :roll: mfg thomas Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 8, 2005 Corsair Employees Share Posted April 8, 2005 I am sorry, but with this MB both modules should be identically matched. Please contact our Customer and ask if they can help you get the modules replaced for 2 that match by sending us an email with a copy of the form or all of your info name address and phone# and the Module part# and copy the link to this post and email it to Rma@corsairmemory.com. If after 1 day or 24 hours excluding weekends you do not get the RMA please email the same to warranty@corsairmemory.com and we will help to resolve it. Link to comment Share on other sites More sharing options...
thomas_003 Posted August 24, 2005 Author Share Posted August 24, 2005 hi, I want to buy a new mainboard because my cpu is too slow ;) the new mb I'm looking for is a ASUS AV8 at your last post you said something about problems with different versions (I have somethimes problems with windows errors (write or read problems), bat it's very seldom... ) the problem now is, that I don't know if it is better on the new mb I hope you can help me sincerely thomas Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 24, 2005 Corsair Employees Share Posted August 24, 2005 Tomas, That MB would have the same issue with matched memory. Please call us at 888-222-4346 and choose option 2 and we will try and help you sort this out! Link to comment Share on other sites More sharing options...
thomas_003 Posted August 25, 2005 Author Share Posted August 25, 2005 k, but its not so easily, because i don't speek a very good english and for sending of a ram module to you i have to pay nearly 20 euro :( so I'll keep the modules and buy new (in a dual pack), for the new mb thx 4 help sincerely thomas Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 25, 2005 Corsair Employees Share Posted August 25, 2005 O.K. no problem, please let me know if you have any questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.