Zia Posted April 6, 2020 Posted April 6, 2020 Hello, I have connected all my fans to the LED HUB and only one fan is lighting up. No matter what fan I connect to the LED HUB, it just give 1 small dot light and that is all. I have also tried connecting the fans to different LED HUB from 3 to 1 and still nothing lights. I have even connected the wire to Commander Pro LED channel 2 and still the same. All my fans are the LL series and I have picture too. Thanks for any help and I have looked for answer didn't find sorry if that was asked before.
DevBiker Posted April 6, 2020 Posted April 6, 2020 First, the fan that you included a photo of isn't an LL fan. Maybe ML? What's the part number on the back of the fan? Second, have you configured the channel in iCUE?
Zia Posted April 6, 2020 Author Posted April 6, 2020 (edited) First, the fan that you included a photo of isn't an LL fan. Maybe ML? What's the part number on the back of the fan? Second, have you configured the channel in iCUE? I have configured the LED channel in ICUE as it was 2 and I have added 3 fans but just the first one is working. The fans are Corsair LL Series CO-9050073-WW LL140 RGB, 140mm Dual Light Loop RGB LED PWM Fan, Single Pack. There is a number back of the fan and its 31-004897 Do you think the fan lights burned out? Because my other 3 fans I connected them to led hub 1 and still didn't light up just the small red dot light was solid. But when I connected the first fan that was working before and it still worked that confused me more. I will buy one more tomorrow and test it out. I think 3 fans rgbs are dead. Edited April 7, 2020 by Zia
Zia Posted April 7, 2020 Author Posted April 7, 2020 First, the fan that you included a photo of isn't an LL fan. Maybe ML? What's the part number on the back of the fan? Second, have you configured the channel in iCUE? I have fixed the problem. The RGB fans light burned out. I just bought new RGB fan series LL and it worked right away. Thanks for the help.
Recommended Posts