copekyle Posted April 5, 2005 Share Posted April 5, 2005 I just built a new PC. I have an AMB 2800 + Processor, DFI LanParty UT nf3 250gb motherboard, and Corsair memory model VS1GBkit400. I was experiencing random reboots and so I had the first memory kit replaced and I was sent another one. I bought it off newegg and I am not sure if they just repackaged what I had and sent it back because it still fails in the same place on memtest98 and goldmemory. What do I do? OH YA, everything is running at stock speeds on the motherboard. Kyle Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 5, 2005 Corsair Employees Share Posted April 5, 2005 Please make sure that you have the latest bios and then load setup/optimized defaults and set the Dim Voltage to 2.7 Volts and test the modules one at a time with http://www.memtest.org to be sure. In addition, please check that the timings are getting set to Cass 2.5-3-3-8 as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.