Jump to content
Corsair Community

Corsair One Crashing constantly after startup


Anualmix
 Share

Recommended Posts

Hello everyone,

 

Hope everyone doing ok with this Covid-19 problems..

 

My Computer:

 

Corsair One Pro

Lot#: 17425105

Specs:

Intel I7-7700K, Liquid Cooled

Nvidia GTX 1080 8gb Liquid Cooled

Corsair 16GB 2400MHz DDR4

480GB SSD / 2TB HDD

Z270 M-ITX

CORSAIR SFX 80 PLUS GOLD

Windows 10 Home Edition

 

The Problem:

 

I bought this computer new on March 2018. Since then it worked flawlessly. However about 1 Month ago this problem started. Let me try to explain.

 

One day I arrived to the C1 and it was on BIOS. I exited Bios and it turned on. When it arrived to Windows crashed, freezed, blue screen and goes to Bios. Attempting to exit Bios but he comes back to Bios. Can't turn on windows. After some attempts or just leaving it on Bios for some time and I was able to reach windows. This is happening day after day after day.

 

Two things I noticed. If I turn it on witouth crashing, If i leave it on start up witouth doing nothing, no apps, browser etc for like 1 hour it becomes more stable and I'm able to use it for like 3-4 hours until a new crash.

 

Other thing I noticed is that despite beeing playing a High Req Game or just browsing on the internet it crashes.

 

After searching for this issue one C1's found some people with similar problems. I've tried some tips that were:

 

Disconnect C1 and the cable to the monitor. Turn off from energy both for 1min. Didn't work.

 

Turning Off Fast Boot on windows definitions. It looks more stable after each crash. With this I mean after going to Bios I'm able to start up the computer until a new crash. It doesn't crash so fast.

 

 

Any more tips? Thank you...

Link to comment
Share on other sites

  • Corsair Employees

Hi there. Since you're able to access BIOS, see if you can change the PCIe Gen setting from Gen 3/Auto to Gen 2 explicitly, your BIOS revision may or may not have this setting visible (newer BIOS revisions for your system have this setting already configured for Gen 2 by default).

 

Have you submitted a ticket to our support system? They'd be able to help more effectively there.

 

As a side note, the current situation has definitely thrown new wrenches in our workloads. I strongly suggest getting a ticket in ASAP since they can track your specific issue and you'll have a rep assigned to you at the very least.

Edited by Corsair CJ
Link to comment
Share on other sites

 Share

×
×
  • Create New...