chrismrq Posted April 4, 2005 Share Posted April 4, 2005 Hello, sorry for my poor english , I've installed this memory TWINX1024-3200XL on my mobo Asustek A7v600 and the system display a blue screen error from windows Xp SP2. these 2 parts of memory are OK (each one tested with memtest+) When i install one of these 2 parts , the system seems to work normally. Do you have an idea ? I would like to work with 1Gb on my computer Thank's Chris Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 5, 2005 Corsair Employees Share Posted April 5, 2005 This MB is single channle with the memory so there is more loading on the memory controller when you add more than one module. I would try and install the modules in slots 1-3 and set the Dim Voltage to 2.8 Volts and set these timings: Dim Voltage to 2.8 Volts SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 6T Then please test the system with http://www.memtest.org Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.