hostilesausage Posted March 8, 2020 Share Posted March 8, 2020 Hi everyone, First off I have a Crystal Series 680X that comes with three LL120RGB fans, a Lighting Node Pro, and Lighting Node Core. The three case fans are connected to 1, 2, 3 on the Lighting Node Core, as you can see here: https://i.imgur.com/q4bzLkt.png. I plugged in the two H100i fans into 4 and 5. I'm not 100% sure if I was supposed to do that, but I figured it made sense. So anyways in iCue, it asks me to configure the hardware. For the Lighting Node Pro I have it configured like this where I selected 5 fans connected: https://i.imgur.com/HRKUwsx.png The weird part is the lighting setup for the H100i: https://i.imgur.com/P8yf2hj.png. I'm not sure if I'm supposed to select no fans, or two fans. I currently have it set to two fans because technically there are two fans connected, but I'd appreciate if someone could clear it up. Lighting effects don't seem to do anything for the fans on the H100i, as it is overridden by the Lighting Node Pro. Link to comment Share on other sites More sharing options...
DevBiker Posted March 8, 2020 Share Posted March 8, 2020 The lighting setup for the Platinum cooler is for the fans connected to the RGB Controller. It has nothing to do with the RPM. So you can set it to "No Fans Connected" as the RGB for your fans is controlled by the Lighting Node Core. Link to comment Share on other sites More sharing options...
hostilesausage Posted March 8, 2020 Author Share Posted March 8, 2020 The lighting setup for the Platinum cooler is for the fans connected to the RGB Controller. It has nothing to do with the RPM. So you can set it to "No Fans Connected" as the RGB for your fans is controlled by the Lighting Node Core. Awesome thanks for clearing it up Link to comment Share on other sites More sharing options...
Recommended Posts