PressureHigh Posted March 5, 2020 Share Posted March 5, 2020 I've got 8 QL120's, two Lighting Node CORE's, and a CommanderPro. I want to have them work in a sequence from #1 - #8 uninterrupted. Does the CoPro only handle each LNC individually (i.e. #1 - #6 and #1 - #6)? Or will it automatically detect two of them and let you choose to run them sequentially (i.e. #1 - #12)? I'm currently in the process of doing a custom loop and haven't tried turning it on yet. I just want to make sure I have everything wired correctly before I start burying things! Any help would be greatly appreciated! Link to comment Share on other sites More sharing options...
Zotty Posted March 5, 2020 Share Posted March 5, 2020 Hi buddy.. for sequential effects you are stuck to groups of 6. meaning each Node Core will play effects such as pong etc at the same time... what case is this for.. or rather. whats the fan config? Link to comment Share on other sites More sharing options...
PressureHigh Posted March 5, 2020 Author Share Posted March 5, 2020 I'm working in the 680X. All slots filled ( 3 front, 2 top, 2 bottom, 1 rear). Link to comment Share on other sites More sharing options...
Zotty Posted March 5, 2020 Share Posted March 5, 2020 do the 2 bottom on the 2nd hub.. front/top/back on the other hub... this will make the 2 bottom fans start with the front fans and just stop where as the rest will continue up and over... Link to comment Share on other sites More sharing options...
Recommended Posts