Jump to content
Corsair Community

Hydro Series H150i pump head mounting issue


Jahmen Myst
 Share

Recommended Posts

Because of former brands I used, their pump heads had instructions about the positions the pump head could and could not be placed in.

 

Corsair Manual: I could not find any indications in the manual about the pump head orientation positions that could or could not be used.

 

My H150i pump head installation orientation position issues: ASUS ROG Rampage VI Extreme Encore x299 motherboard

 

If I install the pump head onto the CPU with the tubes on the right side, the tubes will contact the RAM memory and exert pressure on the closest one.

 

If I install the pump head onto the CPU with the tubes on the bottom, the twist in the tubes in that position exert pressure on the pump head so as to cause it to release from the mounting bracket.

 

If I install the pump head onto the CPU with the tubes on the top, there is no twist in the tubes problem, nor does it rest in the way or on anything.

 

Can the pump head function with the tubes on top to without creating a water circulation problem or issue with cooling?

Link to comment
Share on other sites

 Share

×
×
  • Create New...