Jump to content
Corsair Community

Vengeance RGB DDR4-3000 Voltage


wePsi
 Share

Recommended Posts

Hello!

 

I recently installed 16GB of Corsair DDR4 Memory (CMR16GX4M2C3000C15).

I've added the rest of My System specs to My profile.

 

So, this RAM contains a XMP Profile that clocks it up to 3000Mhz and sets the Voltage to 1.35V. My Ryzen 7 2700 does support DDR4-2933. So, no surprise, the System does not run stable with the XMP Profile enabled. I manually set the Clock to 2933Mhz, the Voltage to 1.35V and the timings to those the XMP profile contains, because 2933 is close to 3000 and I thought there must be a reason for the Settings they provide in the profile and those couldn't be wrong - doesn't run stable.

 

I set the timings to Auto - doesn't work. I set the Clock to 2800 - doesn't work.

 

Then I discovered reducing the voltage helps. It runs stable now on 1.25V DDR4-2933, with the timings of the XMP Profile (15-17-17-35, i think they were).

 

I fear my background-knowledge is not enough for this kind of OC Settings, but I also want to run the RAM on 2933Mhz. So my Question is:

 

What Voltage to 2933Mhz and the Timings from the XMP Profile (15-17-17-35)?

 

Thanks in Advance for your help!

 

Greets,

Martin

Link to comment
Share on other sites

  • 3 weeks later...
 Share

×
×
  • Create New...