Jump to content
Corsair Community

RGB Fans connected to NoPro and h110i cooler different shades


slash366
 Share

Recommended Posts

Hi,

 

I’ve recently bought the 3 pack of corsair ll120s (only need 2) to go with the 2 i have connected to my h110i. All is connected ok but the colours are VERY different across the two sets. All firmwares are up to date. I have pictures but to be honest they don’t really demonstrate just how different they look to the eye. Any ideas?

 

Also i can change the colours round but the fans performance / graphing doesn’t show up in icue either!

 

Thanks

Leigh

DA996794-43F3-4245-A497-6D4D329444CB.thumb.jpeg.1bb3d97eaa89237dbff55933b7087383.jpeg

Edited by slash366
Link to comment
Share on other sites

Yep, this is a known issue that doesn't appear to have a solution yet.

 

These are my ML120 PRO RGB fans set to white via instant lighting.

 

The top two are connected to my H110i and the bottom one is connected to the Lighting Node Pro:

https://imgur.com/3Txoqu5

 

There was another thread about this a few months ago too if you want to read that:

https://forum.corsair.com/v3/showthread.php?t=190515

 

:(

Link to comment
Share on other sites

Ah thank you, I did have a search for others who might have experienced this but couldn’t find anything. That thread you’ve linked is exactly the same as my setup with the same issue. I haven’t tried swapping cables round between the aio and rgb hub but i will do later just to see

 

I’ve sort of managed to get them matching by reducing the blue value within the rgb. On screen it resembles a pale yellow colour but the lights match (sort of)

 

I wonder if anything is being or can be done about it??

 

Ta

Leigh

Link to comment
Share on other sites

Sure enough i unplugged the fans rgb from the aio and plugged them into the node pro and now they all match. It’s a shame i think the colours look better when not plugged into the node pro. There is definitely too much blue when set to white and the pinker colors look very washed out.
Link to comment
Share on other sites

  • 1 month later...

so i've now replaced the lighting node pro with the commander pro and it's still the same, the colours (white, blue, pink mainly) look incredibly washed out compared to if they were plugged directly into my AIO. It's particularly obvious when using instant lighting. this leads me to believe the RGB hub is the issue here.

 

I've found a few people that have noticed the same as i have. I can't believe this set up is particularly unique so i'm surprised more has not been made of it to be honest. Not sure where to go from here?

Link to comment
Share on other sites

 Share

×
×
  • Create New...