Jump to content
Corsair Community

680x Radiator Fitment Tripple Radiators


FireFighterHill
 Share

Recommended Posts

Anyone successfully fit 3 rads in the 680x? 280mm on top, 360mm in the front, and another 280mm on the bottom? The configurator shows I can fit a 240 on top, 360 in the front and 140 in the bottom. But I already have five HD140 RGB fans, 280mm rad, 360mm rad. I wanna use them and I wanna stay symmetrical top to bottom. I know its overkill but so is most everything i build. Otherwise I gotta buy a 240mm rad, 140mm rad.
Link to comment
Share on other sites

You won’t be able to do 2x280 with anything else. Those two can do any of the three sides in combination, but not take a 3rd radiator (aside from a token 120/140). If you want three, you have to do 240mm top/bottom. The issue is the in/out ports. There is no room to work them out, unless perhaps you get a radiator with some unusual end cap ports. I am still not sure that will resolve the front 360mm.

 

There was a Corsair build from a few years back called ‘Brute Force’. It is the 360 + 240 + 240 in a 740 Air. That is the same internal frame as the 680x. It should still be in the builds section of the main website.

Link to comment
Share on other sites

 Share

×
×
  • Create New...