Jump to content
Corsair Community

Lighting Node Pro and fans


cptfap
 Share

Recommended Posts

Hello all :D:,

 

Just have a question about the lighting Node pro:

 

I have to connect 6 LL120 fans and 1 LL140 fan. Which means 2 Corsair RGB Fan Led Hubs *sigh*.

 

The lighting Node pro has two channels: 1 | 2 - would I be correct in saying that I should connect the second RGB hub to this for power or would I have to use another light Node Pro hub?

 

Second issue I am facing is that I need 3, preferably 4 internal USB 2.0 headers. What's the best way to achieve this? I feel that spending another €140 on 2 commander pro units is over the top.

 

There is another brand that has 3 headers but read some bad reviews and its molex powered :sigh!:

Link to comment
Share on other sites

1) There are RGB Fan Splitters available from a 3rd party. You could put all 7 LL fans on a single hub. But no more than 7!!

 

2) You can use one LNP with one hub on each channel. The LNP doesn't power the fan hub; it only provides the data signal.

 

3) Many folks use the NZXT internal USB hub. It works. It's molex so that's icky.

Link to comment
Share on other sites

 Share

×
×
  • Create New...